Re: [PATCH v6] usb: dwc3: fix gadget mode suspend interrupt handler issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 5/6/2023 8:32 AM, Thinh Nguyen wrote:
On Fri, May 05, 2023, Linyu Yuan wrote:
When work in gadget mode, currently driver doesn't update software level
link_state correctly as link state change event is not enabled for most
devices, in function dwc3_gadget_suspend_interrupt(), it will only pass
suspend event to UDC core when software level link state changes, so when
interrupt generated in sequences of suspend -> reset -> conndone ->
suspend, link state is not updated during reset and conndone, so second
suspend interrupt event will not pass to UDC core.

Remove link_state compare in dwc3_gadget_suspend_interrupt() and add a
suspended flag to replace the compare function.

Signed-off-by: Linyu Yuan <quic_linyyuan@xxxxxxxxxxx>
---
v6: (refer v5 https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/1682476780-2367-1-git-send-email-quic_linyyuan@xxxxxxxxxxx/__;!!A4F2R9G_pg!dIQ2VHccmZTXp1-59hTFfEhc65W0gatf1n2wmBfs5Yb0ipjHksD_ESQSmgXky1o1sc4wEZ5qp9JKV7IKmk5Km4bJzi2pGg$ )
1) change subject
2) only keep suspended flag related change

v5: (refer v4 https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/1682393256-15572-1-git-send-email-quic_linyyuan@xxxxxxxxxxx/__;!!A4F2R9G_pg!dIQ2VHccmZTXp1-59hTFfEhc65W0gatf1n2wmBfs5Yb0ipjHksD_ESQSmgXky1o1sc4wEZ5qp9JKV7IKmk5Km4ZXmsKSvQ$ )
1) rename suspend_irq_happen to suspended and document it
2) add old_link_state for link change interrupt usage and change accordingly

v4: (refer v3 https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/1682053861-21737-1-git-send-email-quic_linyyuan@xxxxxxxxxxx/__;!!A4F2R9G_pg!dIQ2VHccmZTXp1-59hTFfEhc65W0gatf1n2wmBfs5Yb0ipjHksD_ESQSmgXky1o1sc4wEZ5qp9JKV7IKmk5Km4aqWNUh-Q$ )
1) remove link state checking in dwc3_gadget_wakeup_interrupt()
2) remove two switch/case to if opeartion

v3: (refer v2 https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/1682042472-21222-1-git-send-email-quic_linyyuan@xxxxxxxxxxx/__;!!A4F2R9G_pg!dIQ2VHccmZTXp1-59hTFfEhc65W0gatf1n2wmBfs5Yb0ipjHksD_ESQSmgXky1o1sc4wEZ5qp9JKV7IKmk5Km4bRmn0HNA$ )
no code change since v2, changes compare v1 as below,
1) add a flag suspend_irq_happen to simplify dwc3_gadget_suspend_interrupt(),
    it will avoid refer to software level link_state, finally link_state will
    only used in dwc3_gadget_linksts_change_interrupt().
2) remove sw setting of link_state in dwc3_gadget_func_wakeup()
3) add dwc3_gadget_interrupt_early() to correct setting of link_state
    and suspend_irq_happen.

v2: update according v1 discussion
v1: https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/1675221286-23833-1-git-send-email-quic_linyyuan@xxxxxxxxxxx/__;!!A4F2R9G_pg!dIQ2VHccmZTXp1-59hTFfEhc65W0gatf1n2wmBfs5Yb0ipjHksD_ESQSmgXky1o1sc4wEZ5qp9JKV7IKmk5Km4ZBn_TPEw$

  drivers/usb/dwc3/core.h   | 2 ++
  drivers/usb/dwc3/gadget.c | 7 ++++++-
  2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index d56457c02996..efacaacbbeb2 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1116,6 +1116,7 @@ struct dwc3_scratchpad_array {
   * @dis_metastability_quirk: set to disable metastability quirk.
   * @dis_split_quirk: set to disable split boundary.
   * @wakeup_configured: set if the device is configured for remote wakeup.
+ * @suspended: set if suspend irq happen to avoid possible consective suspend.
Can we rephrase to: "set to track suspend event due to U3/L2"


thanks, sure.



   * @imod_interval: set the interrupt moderation interval in 250ns
   *			increments or 0 to disable.
   * @max_cfg_eps: current max number of IN eps used across all USB configs.
@@ -1332,6 +1333,7 @@ struct dwc3 {
  	unsigned		dis_split_quirk:1;
  	unsigned		async_callbacks:1;
  	unsigned		wakeup_configured:1;
+	unsigned		suspended:1;
u16 imod_interval; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c0ca4d12f95d..2c750534b405 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4303,8 +4303,10 @@ static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
  {
  	enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
- if (dwc->link_state != next && next == DWC3_LINK_STATE_U3)
+	if (!dwc->suspended && next == DWC3_LINK_STATE_U3) {
+		dwc->suspended = true;
  		dwc3_suspend_gadget(dwc);
+	}
dwc->link_state = next;
  }
@@ -4312,6 +4314,9 @@ static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
  static void dwc3_gadget_interrupt(struct dwc3 *dwc,
  		const struct dwc3_event_devt *event)
  {
+	if  (event->type != DWC3_DEVICE_EVENT_SUSPEND)
Minor nit: spacing between if and (.


thanks for point it out.



While this may work because the next suspend event won't come until a
resume/reset/disconnect event occur, let's clear this only on reset,
resume, and disconnect events.


seem only clear on these three events is not correct.

how about suspend -> wakeup -> suspend interrupt sequences ?

this is mentioned in V1.



+		dwc->suspended = false;
+
  	switch (event->type) {
  	case DWC3_DEVICE_EVENT_DISCONNECT:
  		dwc3_gadget_disconnect_interrupt(dwc);
--
2.17.1

Thanks,
Thinh



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux