On Mon, May 01, 2023 at 08:04:43PM +0530, Krishna Kurapati wrote:
> Add USB and DWC3 node for tertiary port of SC8280 along with multiport
> IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride
> platforms.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 64 ++++++++++++++++++++++++++
> 1 file changed, 64 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 8fa9fbfe5d00..0e4fb286956b 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3133,6 +3133,70 @@ usb_1_role_switch: endpoint {
> };
> };
>
> + usb_2: usb@a4f8800 {
> + compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
> + reg = <0 0x0a4f8800 0 0x400>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
> + <&gcc GCC_USB30_MP_MASTER_CLK>,
> + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
> + <&gcc GCC_USB30_MP_SLEEP_CLK>,
> + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
> + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
> + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
> + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
> + <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
> + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
> + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
> +
> + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_MP_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <200000000>;
> +
> + interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>,
> + <&pdc 126 IRQ_TYPE_EDGE_RISING>,
> + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
This looks wrong. You're missing the &intc phandle for the last four
entries:
DTC arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dtb
/home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sc8280xp.dtsi:3372.4-3378.17: Warning (interrupts_extended_property): /soc@0/usb@a4f8800:interrupts-extended: cell 10 is not a phandle reference
/home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sc8280xp.dtsi:3349.22-3411.5: Warning (interrupts_extended_property): /soc@0/usb@a4f8800: Missing property '#interrupt-cells' in node /soc@0/display-subsystem@ae00000/displayport-controller@aea0000/opp-table or bad phandle (referred from interrupts-extended[10])
also defined at /home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sa8540p-ride.dts:312.8-317.3
/home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sc8280xp.dtsi:3372.4-3378.17: Warning (interrupts_extended_property): /soc@0/usb@a4f8800:interrupts-extended: cell 10 is not a phandle reference
/home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sc8280xp.dtsi:3349.22-3411.5: Warning (interrupts_extended_property): /soc@0/usb@a4f8800: Missing property '#interrupt-cells' in node /soc@0/display-subsystem@ae00000/displayport-controller@ae9a000/ports/port@0/endpoint or bad phandle (referred from interrupts-extended[10])
also defined at /home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sa8295p-adp.dts:587.8-594.3
/home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sc8280xp.dtsi:3372.4-3378.17: Warning (interrupts_extended_property): /soc@0/usb@a4f8800:interrupts-extended: cell 10 is not a phandle reference
/home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sc8280xp.dtsi:3349.22-3411.5: Warning (interrupts_extended_property): /soc@0/usb@a4f8800: Missing property '#interrupt-cells' in node /interconnect-mmss-noc or bad phandle (referred from interrupts-extended[10])
/home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sc8280xp.dtsi:3372.4-3378.17: Warning (interrupts_extended_property): /soc@0/usb@a4f8800:interrupts-extended: cell 10 is not a phandle reference
/home/johan/work/linaro/src/linux/arch/arm64/boot/dts/qcom/sc8280xp.dtsi:3349.22-3411.5: Warning (interrupts_extended_property): /soc@0/usb@a4f8800: Missing property '#interrupt-cells' in node /soc@0/phy@88e7000 or bad phandle (referred from interrupts-extended[10])
> + interrupt-names = "dp_hs_phy_irq", "dm_hs_phy_irq",
> + "ss_phy_irq", "pwr_event_1",
> + "pwr_event_2", "pwr_event_3",
> + "pwr_event_4";
Also the order does not match the binding where you had the pwr_event
interrupts first.
Johan
