[PATCH v3] UHCI:adjust zhaoxin UHCI controllers OverCurrent bit value

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



OverCurrent condition is not standardized in the UHCI spec.
Zhaoxin UHCI controllers report OverCurrent bit active off.
In order to handle OverCurrent condition correctly, the uhci-hcd
driver needs to be told to expect the active-off behavior.

Suggested-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Weitao Wang <WeitaoWang-oc@xxxxxxxxxxx>
---
v2->v3
 - Change patch code style.

 drivers/usb/host/uhci-pci.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c
index 3592f757fe05..7bd2fddde770 100644
--- a/drivers/usb/host/uhci-pci.c
+++ b/drivers/usb/host/uhci-pci.c
@@ -119,11 +119,13 @@ static int uhci_pci_init(struct usb_hcd *hcd)
 
 	uhci->rh_numports = uhci_count_ports(hcd);
 
-	/* Intel controllers report the OverCurrent bit active on.
-	 * VIA controllers report it active off, so we'll adjust the
-	 * bit value.  (It's not standardized in the UHCI spec.)
+	/*
+	 * Intel controllers report the OverCurrent bit active on.  VIA
+	 * and ZHAOXIN controllers report it active off, so we'll adjust
+	 * the bit value.  (It's not standardized in the UHCI spec.)
 	 */
-	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA)
+	if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA ||
+			to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_ZHAOXIN)
 		uhci->oc_low = 1;
 
 	/* HP's server management chip requires a longer port reset delay. */
-- 
2.32.0




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux