Add USB wrapper layer and Cadence USB3 controller dts
configuration for StarFive JH7110 SoC and VisionFive2
Board.
USB controller connect to PHY, The PHY dts configuration
are also added.
Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
---
.../jh7110-starfive-visionfive-2.dtsi | 7 +++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 44 +++++++++++++++++++
2 files changed, 51 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 1155b97b593d..fa97ebfd93ad 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -221,3 +221,10 @@
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+
+&usb0 {
+ phys = <&usbphy0>;
+ phy-names = "usb2";
+ dr_mode = "peripheral";
+ status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 29cd798b6732..eee395e19cdb 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -366,6 +366,50 @@
status = "disabled";
};
+ usb0: usb@10100000 {
+ compatible = "starfive,jh7110-usb";
+ reg = <0x0 0x10100000 0x0 0x10000>,
+ <0x0 0x10110000 0x0 0x10000>,
+ <0x0 0x10120000 0x0 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <100>, <108>, <110>;
+ interrupt-names = "host", "peripheral", "otg";
+ clocks = <&stgcrg JH7110_STGCLK_USB0_LPM>,
+ <&stgcrg JH7110_STGCLK_USB0_STB>,
+ <&stgcrg JH7110_STGCLK_USB0_APB>,
+ <&stgcrg JH7110_STGCLK_USB0_AXI>,
+ <&stgcrg JH7110_STGCLK_USB0_UTMI_APB>;
+ clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
+ resets = <&stgcrg JH7110_STGRST_USB0_PWRUP>,
+ <&stgcrg JH7110_STGRST_USB0_APB>,
+ <&stgcrg JH7110_STGRST_USB0_AXI>,
+ <&stgcrg JH7110_STGRST_USB0_UTMI_APB>;
+ reset-names = "pwrup", "apb", "axi", "utmi_apb";
+ starfive,stg-syscon = <&stg_syscon 0x4>;
+ status = "disabled";
+ };
+
+ usbphy0: phy@10200000 {
+ compatible = "starfive,jh7110-usb-phy";
+ reg = <0x0 0x10200000 0x0 0x10000>;
+ clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
+ <&stgcrg JH7110_STGCLK_USB0_APP_125>;
+ clock-names = "125m", "app_125m";
+ #phy-cells = <0>;
+ };
+
+ pciephy0: phy@10210000 {
+ compatible = "starfive,jh7110-pcie-phy";
+ reg = <0x0 0x10210000 0x0 0x10000>;
+ #phy-cells = <0>;
+ };
+
+ pciephy1: phy@10220000 {
+ compatible = "starfive,jh7110-pcie-phy";
+ reg = <0x0 0x10220000 0x0 0x10000>;
+ #phy-cells = <0>;
+ };
+
stgcrg: clock-controller@10230000 {
compatible = "starfive,jh7110-stgcrg";
reg = <0x0 0x10230000 0x0 0x10000>;
--
2.17.1
