Re: [PATCH v4 0/7] Add JH7110 USB and USB PHY driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/4/13 22:13, Krzysztof Kozlowski wrote:
> On 13/04/2023 12:44, Minda Chen wrote:
>> 
>> 
>> On 2023/4/12 16:26, Krzysztof Kozlowski wrote:
>>> On 06/04/2023 03:52, Minda Chen wrote:
>>>> This patchset adds USB driver and USB PHY for the StarFive JH7110 SoC.
>>>> USB work mode is peripheral and using USB 2.0 PHY in VisionFive 2 board.
>>>> The patch has been tested on the VisionFive 2 board.
>>>>
>>>> This patchset should be applied after the patchset [1], [2] and[3]:
>>>> [1] https://patchwork.kernel.org/project/linux-riscv/cover/20230314124404.117592-1-xingyu.wu@xxxxxxxxxxxxxxxx/
>>>> [2] https://lore.kernel.org/all/20230315055813.94740-1-william.qiu@xxxxxxxxxxxxxxxx/
>>>> [3] https://patchwork.kernel.org/project/linux-phy/cover/20230315100421.133428-1-changhuang.liang@xxxxxxxxxxxxxxxx/
>>>>
>>>> This patchset is base on v6.3-rc4
>>>>
>>>> patch 1 is usb phy dt-binding document.
>>>> patch 2 is Pcie PHY dt-binding document.
>>>> patch 3 is USB 2.0 PHY driver.
>>>> patch 4 is PCIe PHY driver.
>>>> patch 5 is usb dt-binding document.
>>>> patch 6 is the wrapper module driver of Cadence USB3. USB controller IP is Cadence USB3.
>>>> patch 7 is USB device tree configuration.
>>>>
>>>> previous version
>>>> ---
>>>> v1: https://patchwork.kernel.org/project/linux-usb/cover/20230306095212.25840-1-minda.chen@xxxxxxxxxxxxxxxx/
>>>> v2: https://patchwork.kernel.org/project/linux-usb/cover/20230308082800.3008-1-minda.chen@xxxxxxxxxxxxxxxx/
>>>
>>> This is v2.
>>>
>>>> v3: https://patchwork.kernel.org/project/linux-usb/cover/20230315104411.73614-1-minda.chen@xxxxxxxxxxxxxxxx/
>>>>
>>>> changes
>>>> v4:
>>>>   1. (patch 1) split PCIe PHY dt-binding doc to patch 2.
>>>>   2. (patch 2) PCIe PHY add stg and sys con configuration to dt-binding doc.
>>>>   3. (patch 3)
>>>>      - split PCIe PHY driver to patch 4.
>>>>      - replace dr_mode to phy mode in jh7110_usb2_phy.
>>>>   4. (patch 4) 
>>>>      - Makefile and Kconfig sorted by alphabet sequence.
>>>>      - Add PCIe PHY stg and syscon PHY connection configuration
>>>>        for USB 3.0.
>>>>   5. (patch 5)
>>>>      - commit message changed.
>>>>      - merge wrapper dts node and cdns3 node in example.
>>>>      - Add interrupts, reg, phy and dr_mode in property.
>>>>      - Add reset-name in property example.
>>>>   6. (patch 6)
>>>>      - For dts node is merged, Using platform_device_alloc and
>>>>        platform_device_add to generate cadence sub device.
>>>>      - IOMEM and IRQ resource are passed to Cadence sub device.
>>>>      - Add PHY ops process for PHY dts setting can not be passed to
>>>>        Cadence USB driver.
>>>>      - remove the stg and sys USB 3.0 PHY configuration.
>>>>      - Change the suspend clock reset and clock enable sequence.
>>>>      - Get all reset and clock resources before enable them in 
>>>>        cdns_clk_rst_init.
>>>>      - commit message changed.
>>>>   7. (patch 7)
>>>>      - merge wrapper dts node and cdns3 node in usb dts.
>>>>      - move the stg and sys USB 3.0 PHY confiuration to
>>>>        PCIe PHY dts node.
>>>>      - commit message changed.
>>>>      - Add reset-names dts.
>>>>
>>>> v3:
>>>>   1. Add patch 1 - 4. Add USB PHY driver and dt-binding doc. 
>>>>      USB PHY codes are moved to patch 3 and patch 4.
>>>>   2. (patch 5)
>>>>      - USB wrapper module dts document is moved to usb directory.
>>>>      - Remove the 'dr_mode' and 'starfive,usb2-only' setting.
>>>>      - Some dts format changes. dts binding check pass.
>>>>   3. (patch 6)
>>>>      - Remove the PHY codes. 
>>>>      - Search 'dr_mode' and phy setting from Cadence subnode.
>>>>   4. (patch 7)
>>>>      - Add USB PHY dts configurion. 
>>>>      - 'dr_mode' is moved to Cadence controller submode.
>>>>
>>>> v2:
>>>>   1. (patch 5) dt-binding changes. The document example is the same as dts config.
>>>>   2. (patch 6) using dev_err_probe and syscon_regmap_lookup_by_phandle_args function. Some formats changes
>>>>   3. (patch 7) dts nodes sorted by the address after @
>>>>
>>>>
>>>> Minda Chen (7):
>>>>   dt-bindings: phy: Add StarFive JH7110 USB document
>>>>   dt-bindings: phy: Add StarFive JH7110 PCIe document
>>>>   phy: starfive: add JH7110 USB 2.0 PHY driver.
>>>>   phy: starfive: add JH7110 PCIE 2.0 PHY driver.
>>>>   dt-bindings: usb: Add StarFive JH7110 USB Bindings YAML schemas
>>>>   usb: cdns3: add StarFive JH7110 USB driver.
>>>>   riscv: dts: starfive: add USB dts configuration for JH7110
>>>>
>>>>  .../phy/starfive,jh7110-pcie-phy.yaml         |  58 +++
>>>>  .../bindings/phy/starfive,jh7110-usb-phy.yaml |  50 +++
>>>>  .../bindings/usb/starfive,jh7110-usb.yaml     | 136 +++++++
>>>>  MAINTAINERS                                   |  16 +
>>>>  .../jh7110-starfive-visionfive-2.dtsi         |   7 +
>>>>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  44 ++
>>>>  drivers/phy/starfive/Kconfig                  |  22 +
>>>>  drivers/phy/starfive/Makefile                 |   2 +
>>>>  drivers/phy/starfive/phy-jh7110-pcie.c        | 197 +++++++++
>>>>  drivers/phy/starfive/phy-jh7110-usb.c         | 161 ++++++++
>>>>  drivers/usb/cdns3/Kconfig                     |  11 +
>>>>  drivers/usb/cdns3/Makefile                    |   1 +
>>>>  drivers/usb/cdns3/cdns3-starfive.c            | 378 ++++++++++++++++++
>>>>  drivers/usb/cdns3/core.h                      |   3 +
>>>>  14 files changed, 1086 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
>>>>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>>>>  create mode 100644 Documentation/devicetree/bindings/usb/starfive,jh7110-usb.yaml
>>>>  create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
>>>>  create mode 100644 drivers/phy/starfive/phy-jh7110-usb.c
>>>>  create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
>>>>
>>>>
>>>> base-commit: 0ec57cfa721fbd36b4c4c0d9ccc5d78a78f7fa35
>>>> prerequisite-patch-id: 24a6e3442ed1f5454ffb4a514cfd768436a87090
>>>> prerequisite-patch-id: 55390537360f25c8b9cbfdc30b73ade004f436f7
>>>
>>> fatal: bad object 55390537360f25c8b9cbfdc30b73ade004f436f7
>>>
>>> What commits do you reference? How are they helpful?
>>>
>> I use "git format-patch --base=(commit) to generate patchset.
>> Maybe I set the wrong base commit.
> 
> How are they helpful if these are private commits?
>> Best regards,
> Krzysztof
> 
base-commit is not private commits. 
I should set base commit 197b6b60ae7bc51dd0814953c562833143b292aa. This is 6.3-rc4 commit.
But I set 0ec57cfa721fbd36b4c4c0d9ccc5d78a78f7fa35. This is 6.3-rc4's previous commit.



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux