On 4/14/23 12:41, Fabrice Gasnier wrote:
> Add error handling in __dwc2_lowlevel_hw_enable() that may leave the
> clocks and regulators enabled upon error.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
> ---
> drivers/usb/dwc2/platform.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index d1589ba7d322..c431ce6c119f 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -104,7 +104,7 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
> if (hsotg->clk) {
> ret = clk_prepare_enable(hsotg->clk);
> if (ret)
> - return ret;
> + goto err_dis_reg;
> }
>
> if (hsotg->uphy) {
> @@ -113,10 +113,25 @@ static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
> ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
> } else {
> ret = phy_init(hsotg->phy);
> - if (ret == 0)
> + if (ret == 0) {
> ret = phy_power_on(hsotg->phy);
> + if (ret)
> + phy_exit(hsotg->phy);
> + }
> }
>
> + if (ret)
> + goto err_dis_clk;
> +
> + return 0;
> +
> +err_dis_clk:
> + if (hsotg->clk)
> + clk_disable_unprepare(hsotg->clk);
> +
> +err_dis_reg:
> + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
> +
> return ret;
> }
>
