On Wed, Apr 12, 2023 at 06:17:34PM +0200, Fabrice Gasnier wrote:
> ucsi_init() may be deferred as usb_role_sw may be deferred in
> ucsi_register_port(). This results in several PPM init failed (-517)
> messages maybe printed several times upon boot, like on stm32mp135f-dk
> board, until the role_switch driver gets probed.
>
> [ 19.880945] dwc2 49000000.usb: supply vusb_d not found, using dummy regulator
> [ 19.887136] dwc2 49000000.usb: supply vusb_a not found, using dummy regulator
> [ 19.975432] ucsi-stm32g0-i2c 0-0053: PPM init failed (-517)
> [ 20.155746] dwc2 49000000.usb: EPs: 9, dedicated fifos, 952 entries in SPRAM
> [ 20.175429] ucsi-stm32g0-i2c 0-0053: PPM init failed (-517)
> [ 20.184242] dwc2 49000000.usb: DWC OTG Controller
>
> Adopt dev_err_probe() instead of dev_err(), to only print other errors.
> Also print an error in case the wait count has expired.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> ---
> drivers/usb/typec/ucsi/ucsi.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index f632350f6dcb..4d809e0d7761 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -1447,11 +1447,13 @@ static void ucsi_init_work(struct work_struct *work)
>
> ret = ucsi_init(ucsi);
> if (ret)
> - dev_err(ucsi->dev, "PPM init failed (%d)\n", ret);
> + dev_err_probe(ucsi->dev, ret, "PPM init failed\n");
>
> if (ret == -EPROBE_DEFER) {
> - if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT)
> + if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT) {
> + dev_err(ucsi->dev, "PPM init failed, stop trying\n");
> return;
> + }
>
> queue_delayed_work(system_long_wq, &ucsi->work,
> UCSI_ROLE_SWITCH_INTERVAL);
> --
> 2.25.1
--
heikki
