[PATCH v1 2/2] thunderbolt: Make use of ioread32_poll_timeout()

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

Instead of open coding the same routine switch the code to use
ioread32_poll_timeout().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/thunderbolt/nhi.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index d76e923fbc6a..d0bf11b40131 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -16,8 +16,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/iommu.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
-#include <linux/delay.h>
 #include <linux/property.h>
 #include <linux/string_helpers.h>
 
@@ -40,7 +40,7 @@
 #define MSIX_MIN_VECS		6
 #define MSIX_MAX_VECS		16
 
-#define NHI_MAILBOX_TIMEOUT	500 /* ms */
+#define NHI_MAILBOX_TIMEOUT_US	500000
 
 /* Host interface quirks */
 #define QUIRK_AUTO_CLEAR_INT	BIT(0)
@@ -830,8 +830,8 @@ EXPORT_SYMBOL_GPL(tb_ring_free);
  */
 int nhi_mailbox_cmd(struct tb_nhi *nhi, enum nhi_mailbox_cmd cmd, u32 data)
 {
-	ktime_t timeout;
 	u32 val;
+	int ret;
 
 	iowrite32(data, nhi->iobase + REG_INMAIL_DATA);
 
@@ -840,16 +840,12 @@ int nhi_mailbox_cmd(struct tb_nhi *nhi, enum nhi_mailbox_cmd cmd, u32 data)
 	val |= REG_INMAIL_OP_REQUEST | cmd;
 	iowrite32(val, nhi->iobase + REG_INMAIL_CMD);
 
-	timeout = ktime_add_ms(ktime_get(), NHI_MAILBOX_TIMEOUT);
-	do {
-		val = ioread32(nhi->iobase + REG_INMAIL_CMD);
-		if (!(val & REG_INMAIL_OP_REQUEST))
-			break;
-		usleep_range(10, 20);
-	} while (ktime_before(ktime_get(), timeout));
+	ret = ioread32_poll_timeout(nhi->iobase + REG_INMAIL_CMD,
+				    val, !(val & REG_INMAIL_OP_REQUEST),
+				    40, NHI_MAILBOX_TIMEOUT_US);
+	if (ret)
+		return ret;
 
-	if (val & REG_INMAIL_OP_REQUEST)
-		return -ETIMEDOUT;
 	if (val & REG_INMAIL_ERROR)
 		return -EIO;
 
-- 
2.40.0.1.gaa8946217a0b