Add USB phy and controller related nodes Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> --- Changes in v5: - Fix additional comments - Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml - 'make dtbs_check' giving the following messages since ipq9574 doesn't have power domains. Hope this is ok /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml Changes in v4: - Use newer bindings without subnodes - Fix coding style issues Changes in v3: - Insert the nodes at proper location Changes in v2: - Fixed issues flagged by Krzysztof - Fix issues reported by make dtbs_check - Remove NOC related clocks (to be added with proper interconnect support) Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 ++++++++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 2bb4053..8fa9e1a 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -186,6 +186,33 @@ method = "smc"; }; + reg_usb_3p3: s3300 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "usb-phy-vdd-dummy"; + }; + + reg_usb_1p8: s1800 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "usb-phy-pll-dummy"; + }; + + reg_usb_0p925: s0925 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "usb-phy-dummy"; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -215,6 +242,52 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + qusb_phy_0: phy@7b000 { + compatible = "qcom,ipq9574-qusb2-phy"; + reg = <0x0007b000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo_board_clk>; + clock-names = "cfg_ahb", + "ref"; + + vdd-supply = <®_usb_0p925>; + vdda-pll-supply = <®_usb_1p8>; + vdda-phy-dpdm-supply = <®_usb_3p3>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + ssphy_0: phy@7d000 { + compatible = "qcom,ipq9574-qmp-usb3-phy"; + reg = <0x0007d000 0xa00>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&xo_board_clk>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + vdda-pll-supply = <®_usb_1p8>; + vdda-phy-supply = <®_usb_0p925>; + + status = "disabled"; + + #clock-cells = <0>; + clock-output-names = "usb0_pipe_clk"; + }; + pcie0_phy: phy@84000 { compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; reg = <0x00084000 0x1bc>; /* Serdes PLL */ @@ -436,6 +509,53 @@ status = "disabled"; }; + usb3: usb@8a00000 { + compatible = "qcom,ipq9574-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SNOC_USB_CLK>, + <&gcc GCC_ANOC_USB_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + + clock-names = "sys_noc_axi", + "anoc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <200000000>, + <24000000>; + + interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event"; + + resets = <&gcc GCC_USB_BCR>; + status = "disabled"; + + dwc_0: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xcd00>; + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "ref"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_0>, <&ssphy_0>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ -- 2.7.4