On 28/03/2023 16:18, Nishanth Menon wrote:
> On 15:43-20230328, Roger Quadros wrote:
>> USB0 is a Type-C port with dual data role and power sink.
>>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 4 ++
>> arch/arm64/boot/dts/ti/k3-am625-sk.dts | 44 ++++++++++++++++++-
>> .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 4 --
>> 3 files changed, 47 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
>> index b2ca19e3042e..a3c3609833fd 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
>> @@ -225,3 +225,7 @@ ldo4_reg: ldo4 {
>> };
>> };
>> };
>> +
>> +&usb0 {
>> + dr_mode = "peripheral";
>> +};
>> diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>> index cdc0858dd1b2..13fdaa9ce4e7 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
>> @@ -136,6 +136,35 @@ AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
>> };
>> };
>>
>> +&main_i2c0 {
>> + typec_pd: tps6598x@3f {
>> + compatible = "ti,tps6598x";
>> + reg = <0x3f>;
>> + interrupt-parent = <&exp1>;
>> + interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
>> + interrupt-names = "irq";
>> +
>> + connector {
>> + compatible = "usb-c-connector";
>> + label = "USB-C";
>> + self-powered;
>> + data-role = "dual";
>> + power-role = "sink";
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> + usb_con_hs: endpoint {
>> + remote-endpoint = <&usb0_hs_ep>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> +};
>> +
>> &main_i2c1 {
>> exp1: gpio@22 {
>> compatible = "ti,tca6424";
>> @@ -150,7 +179,7 @@ exp1: gpio@22 {
>> "UART1_FET_BUF_EN", "WL_LT_EN",
>> "GPIO_HDMI_RSTn", "CSI_GPIO1",
>> "CSI_GPIO2", "PRU_3V3_EN",
>> - "HDMI_INTn", "TEST_GPIO2",
>> + "HDMI_INTn", "PD_I2C_IRQ",
>> "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
>> "MCASP1_FET_SEL", "UART1_FET_SEL",
>> "TSINT#", "IO_EXP_TEST_LED";
>> @@ -256,3 +285,16 @@ partition@3fc0000 {
>> };
>> };
>> };
>> +
>> +&usb0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + usb-role-switch;
>> +
>> + port@0 {
>> + reg = <0>;
>> + usb0_hs_ep: endpoint {
>> + remote-endpoint = <&usb_con_hs>;
>> + };
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
>> index 80e8b9b9a5f5..e3223088b90c 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
>> @@ -264,10 +264,6 @@ &usbss1 {
>> ti,vbus-divider;
>> };
>>
>> -&usb0 {
>> - dr_mode = "peripheral";
>> -};
>> -
>
> How about sk-lp ?
moved it to sk-lp. see above in this patch.
>
>> &usb1 {
>> dr_mode = "host";
>> pinctrl-names = "default";
>> --
>> 2.34.1
>>
>
cheers,
-roger
