[PATCH] usb: typec: tcpm: try to get role switch from tcpc fwnode

[Li Jun <jun.li@xxxxxxx>]

Try to get usb role switch from tcpc fwnode if failed to
get role switch from port dev, this is for case the port
for role switch endpoint is located in connector node,
as per connector binding doc, port@0 for HS is required.

ptn5110: tcpc@50 {
	compatible = "nxp,ptn5110";
	...
	status = "okay";

	connector {
		compatible = "usb-c-connector";
		label = "USB-C";
		...

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				typec_conn: endpoint {
					remote-endpoint = <&usb2_controller>;
				};
			};
		};
	};
};

Signed-off-by: Li Jun <jun.li@xxxxxxx>
---
 drivers/usb/typec/tcpm/tcpm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index a0d943d78580..f0534bdb4462 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -6557,6 +6557,8 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc)
 	port->port_type = port->typec_caps.type;
 
 	port->role_sw = usb_role_switch_get(port->dev);
+	if (!port->role_sw)
+		port->role_sw = fwnode_usb_role_switch_get(tcpc->fwnode);
 	if (IS_ERR(port->role_sw)) {
 		err = PTR_ERR(port->role_sw);
 		goto out_destroy_wq;
-- 
2.34.1