USB0 is a Type-C port with dual data role and power sink. Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx> --- arch/arm64/boot/dts/ti/k3-am625-sk.dts | 40 ++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index be027fad5f61..c80b12943881 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -315,6 +315,33 @@ &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + + tps6598x@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + interrupt-parent = <&exp1>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "irq"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; + }; + }; + }; + }; + }; }; &main_i2c1 { @@ -336,7 +363,7 @@ exp1: gpio@22 { "UART1_FET_BUF_EN", "WL_LT_EN", "GPIO_HDMI_RSTn", "CSI_GPIO1", "CSI_GPIO2", "PRU_3V3_EN", - "HDMI_INTn", "TEST_GPIO2", + "HDMI_INTn", "PD_I2C_IRQ", "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", "MCASP1_FET_SEL", "UART1_FET_SEL", "TSINT#", "IO_EXP_TEST_LED"; @@ -486,7 +513,16 @@ &usbss1 { }; &usb0 { - dr_mode = "peripheral"; + #address-cells = <1>; + #size-cells = <0>; + usb-role-switch; + + port@0 { + reg = <0>; + usb0_hs_ep: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; }; &usb1 { -- 2.34.1