Add sysfs attributes Documentation entries for LJCA device Signed-off-by: Ye Xiang <xiang.ye@xxxxxxxxx> --- .../ABI/testing/sysfs-bus-usb-devices-ljca | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-usb-devices-ljca diff --git a/Documentation/ABI/testing/sysfs-bus-usb-devices-ljca b/Documentation/ABI/testing/sysfs-bus-usb-devices-ljca new file mode 100644 index 000000000000..16eecaf870e2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-usb-devices-ljca @@ -0,0 +1,36 @@ +What: /sys/bus/usb/.../ljca_version +Date: July 2023 +KernelVersion: 6.4 +Contact: Ye Xiang <xiang.ye@xxxxxxxxx> +Description: + Provides the current firmware version of LJCA device. + The format is Major.Minor.Patch.Build, where + Major, Minor, Patch, and Build are decimal numbers. + For example: 1.0.0.256 + +What: /sys/bus/usb/.../ljca_enable_dfu +Date: July 2023 +KernelVersion: 6.4 +Contact: Ye Xiang <xiang.ye@xxxxxxxxx> +Description: + Writing 1 to this file to force the LJCA device into DFU + mode so the firmware can be updated. After firmware + updating has been done, the device will back to normal + working mode. + +What: /sys/bus/usb/.../ljca_trace_level +Date: July 2023 +KernelVersion: 6.4 +Contact: Ye Xiang <xiang.ye@xxxxxxxxx> +Description: + Writing N to this file to set firmware log level of LJCA + device. The log can be printed to another computer through + UART ports in LJCA device. Valid values: + + == ========== + 0 LEVEL_ERROR + 1 LEVEL_WARNING + 2 LEVEL_INFO + 3 LEVEL_DEBUG + 4 LEVEL_OFF + == ========== -- 2.34.1
