Hi Fabrice,
On 3/15/23 15:44, Fabrice Gasnier wrote:
When in dual role mode (dr_mode == USB_DR_MODE_OTG), platform probe
successively basically calls:
- dwc2_gadget_init()
- dwc2_hcd_init()
- dwc2_lowlevel_hw_disable() since recent change [1]
- usb_add_gadget_udc()
The PHYs (and so the clocks it may provide) shouldn't be disabled for all
SoCs, in OTG mode, as the HCD part has been initialized.
On STM32 this creates some weird race condition upon boot, when:
- initially attached as a device, to a HOST
- and there is a gadget script invoked to setup the device part.
Below issue becomes systematic, as long as the gadget script isn't
started by userland: the hardware PHYs (and so the clocks provided by the
PHYs) remains disabled.
It ends up in having an endless interrupt storm, before the watchdog
resets the platform.
[ 16.924163] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM
[ 16.962704] dwc2 49000000.usb-otg: DWC OTG Controller
[ 16.966488] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 2
[ 16.974051] dwc2 49000000.usb-otg: irq 77, io mem 0x49000000
[ 17.032170] hub 2-0:1.0: USB hub found
[ 17.042299] hub 2-0:1.0: 1 port detected
[ 17.175408] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
[ 17.181741] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
[ 17.189303] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode
...
The host part is also not functional, until the gadget part is configured.
The HW may only be disabled for peripheral mode (original init), e.g.
dr_mode == USB_DR_MODE_PERIPHERAL, until the gadget driver initializes.
But when in USB_DR_MODE_OTG, the HW should remain enabled, as the HCD part
is able to run, while the gadget part isn't necessarily configured.
I don't fully get the of purpose the original change, that claims disabling
the hardware is missing. It creates conditions on SOCs using the PHY
initialization to be completely non working in OTG mode. Original
change [1] should be reworked to be platform specific.
[1] https://urldefense.com/v3/__https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com__;!!OOPJP91ZZw!gKDR7WKb_MJfqvHDitpGCxrXjMC0sSgfG7hMxQad2X2atPHRu9ePfzJhI8K1frODjhcFQYPQ7xsEs0GqPq6IDFUB4T1EJqsmRojKJrzOiA$
Thanks for adding me to the recipients.
So.. basically Dual Role mode doesn't work on Theobroma Ringneck (based
on Rockchip PX30) module, at all, without the three patches listed in
the patch series you linked to.
Now, even with the whole patch series applied, I still get stability
issues for dual role mode, but at least it **sometimes** works.
I applied your patch and it seems I still have support for forced HOST
and DEVICE mode on the OTG port. Considering dual role mode is not
stable anyway and that this patch alone doesn't seem to make things
better/worse,
Reviewed-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
Tested-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
I wish I had some access to some datasheet/technical manual or something
but right now sinking time for Dual Role mode support is not in our top
priority list so we'll have to live without it. However, any help is
much welcomed.
BTW, I assume you would want to backport this to stable releases too (v6.2).
Cheers,
Quentin
Fixes: ade23d7b7ec5 ("usb: dwc2: power on/off phy for peripheral mode in dual-role mode")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
---
drivers/usb/dwc2/gadget.c | 6 ++----
drivers/usb/dwc2/platform.c | 3 +--
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 62fa6378d2d7..8b15742d9e8a 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4549,8 +4549,7 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
hsotg->gadget.dev.of_node = hsotg->dev->of_node;
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
- if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL ||
- (hsotg->dr_mode == USB_DR_MODE_OTG && dwc2_is_device_mode(hsotg))) {
+ if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
ret = dwc2_lowlevel_hw_enable(hsotg);
if (ret)
goto err;
@@ -4612,8 +4611,7 @@ static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget)
if (!IS_ERR_OR_NULL(hsotg->uphy))
otg_set_peripheral(hsotg->uphy->otg, NULL);
- if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL ||
- (hsotg->dr_mode == USB_DR_MODE_OTG && dwc2_is_device_mode(hsotg)))
+ if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
return 0;
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 23ef75996823..262c13b6362a 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -576,8 +576,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
dwc2_debugfs_init(hsotg);
/* Gadget code manages lowlevel hw on its own */
- if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL ||
- (hsotg->dr_mode == USB_DR_MODE_OTG && dwc2_is_device_mode(hsotg)))
+ if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
