Re: [PATCH v3] USB: serial: xr: Add TIOCGRS485 and TIOCSRS485 ioctls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 14, 2023 at 09:00:01AM +0200, Jarkko Sonninen wrote:
> Add support for RS-485 in Exar USB adapters.
> RS-485 mode is controlled by TIOCGRS485 and TIOCSRS485 ioctls.
> Gpio mode register is set to enable RS-485.
> 
> Signed-off-by: Jarkko Sonninen <kasper@xxxxxx>
> ---
> 
> In this version only rs485.flags are stored to state.
> There is no locking as only one bit of the flags is used.
> ioctl returns -ENOIOCTLCMD as the actual error handling is in tty code.

And the difference between previous versions?  Take a look at the
documentation for how to better describe version differences please.

> 
>  drivers/usb/serial/xr_serial.c | 62 +++++++++++++++++++++++++++++++++-
>  1 file changed, 61 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
> index fdb0aae546c3..7b542ccb6596 100644
> --- a/drivers/usb/serial/xr_serial.c
> +++ b/drivers/usb/serial/xr_serial.c
> @@ -93,6 +93,7 @@ struct xr_txrx_clk_mask {
>  #define XR_GPIO_MODE_SEL_DTR_DSR	0x2
>  #define XR_GPIO_MODE_SEL_RS485		0x3
>  #define XR_GPIO_MODE_SEL_RS485_ADDR	0x4
> +#define XR_GPIO_MODE_RS485_TX_H		0x8
>  #define XR_GPIO_MODE_TX_TOGGLE		0x100
>  #define XR_GPIO_MODE_RX_TOGGLE		0x200
>  
> @@ -237,6 +238,7 @@ static const struct xr_type xr_types[] = {
>  struct xr_data {
>  	const struct xr_type *type;
>  	u8 channel;			/* zero-based index or interface number */
> +	u32 rs485_flags;

Nit, you might want to move this up above channel as you now have a hole
in this structure.  Not like it's that big of a deal so if you don't
have to respin this no need to change.

>  };
>  
>  static int xr_set_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 val)
> @@ -645,9 +647,13 @@ static void xr_set_flow_mode(struct tty_struct *tty,
>  	/* Set GPIO mode for controlling the pins manually by default. */
>  	gpio_mode &= ~XR_GPIO_MODE_SEL_MASK;
>  
> +	if (data->rs485_flags & SER_RS485_ENABLED)
> +		gpio_mode |= XR_GPIO_MODE_SEL_RS485 | XR_GPIO_MODE_RS485_TX_H;
> +	else if (C_CRTSCTS(tty) && C_BAUD(tty) != B0)
> +		gpio_mode |= XR_GPIO_MODE_SEL_RTS_CTS;
> +
>  	if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) {
>  		dev_dbg(&port->dev, "Enabling hardware flow ctrl\n");
> -		gpio_mode |= XR_GPIO_MODE_SEL_RTS_CTS;
>  		flow = XR_UART_FLOW_MODE_HW;
>  	} else if (I_IXON(tty)) {
>  		u8 start_char = START_CHAR(tty);
> @@ -827,6 +833,59 @@ static void xr_set_termios(struct tty_struct *tty,
>  	xr_set_flow_mode(tty, port, old_termios);
>  }
>  
> +static int xr_get_rs485_config(struct tty_struct *tty,
> +			 unsigned int __user *argp)
> +{
> +	struct usb_serial_port *port = tty->driver_data;
> +	struct xr_data *data = usb_get_serial_port_data(port);
> +	struct serial_rs485 rs485;
> +
> +	dev_dbg(tty->dev, "Flags %02x\n", data->rs485_flags);
> +	memset(&rs485, 0, sizeof(rs485));
> +	rs485.flags = data->rs485_flags;
> +	if (copy_to_user(argp, &rs485, sizeof(rs485)))
> +		return -EFAULT;
> +
> +	return 0;
> +}
> +
> +static int xr_set_rs485_config(struct tty_struct *tty,
> +			 unsigned long __user *argp)
> +{
> +	struct usb_serial_port *port = tty->driver_data;
> +	struct xr_data *data = usb_get_serial_port_data(port);
> +	struct serial_rs485 rs485;
> +
> +	if (copy_from_user(&rs485, argp, sizeof(rs485)))
> +		return -EFAULT;
> +
> +	dev_dbg(tty->dev, "Flags %02x\n", rs485.flags);
> +	data->rs485_flags = rs485.flags & SER_RS485_ENABLED;
> +	xr_set_flow_mode(tty, port, (const struct ktermios *)0);
> +
> +	// Only the enable flag is implemented

All the other comments in this file use /* */ so you should be
consistent.

> +	memset(&rs485, 0, sizeof(rs485));

But you just copied this from userspace, why zero it out again?  Is that
to be expected (I really don't remember, sorry).

Anyway, just minor comments, I'll let others review it as well.

thanks,

greg k-h



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux