Re: [PATCH] dt-bindings: usb: usb-device: make "compatible" optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 28 Feb 2023 19:29:09 +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
> 
> This binding was originally meant to describe hard-wired USB devices but
> in some situations we need to describe USB ports. That is needed e.g. if
> USB port is meant to be used as a trigger source but it can have any
> device plugged. It's a common case for home routers which have USB ports
> (with no hard-wired devices) and USB LEDs to indicate ports state.
> 
> There is no point (and no easy way) to add separate binding covering
> just USB ports. Adjust existing devices binding to allow describing
> ports.
> 
> This fixes:
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: port@1: 'compatible' is a required property
>         From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: port@2: 'compatible' is a required property
>         From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'port@1', 'port@2' were unexpected)
>         From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: port@1: 'compatible' is a required property
>         From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: port@2: 'compatible' is a required property
>         From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'port@1', 'port@2' were unexpected)
>         From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: port@1: 'compatible' is a required property
>         From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml
> arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'phy-names', 'phys', 'port@1' were unexpected)
>         From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml
> 
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> ---
> I tried to add USB port binding but it didn't work because of $nodename.
> Rob suggested to just make "compatible" optional:
> [PATCH robh next] dt-bindings: usb: add USB controller port
> https://www.spinics.net/lists/linux-usb/msg209553.html
> ---
>  Documentation/devicetree/bindings/usb/usb-device.yaml | 1 -
>  1 file changed, 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux