RE: [PATCH v2] usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ziyang,

On 2/21/2023 2:30 PM, Ziyang Huang <hzyitc@xxxxxxxxxxx> wrote:
>From: Ziyang Huang <hzyitc@xxxxxxxxxxx>
>Sent: Tuesday, February 21, 2023 2:30 PM
>To: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
>Cc: gregkh@xxxxxxxxxxxxxxxxxxx; fabrice.gasnier@xxxxxxxxxxx;
>amelie.delaunay@xxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx; linux-
>kernel@xxxxxxxxxxxxxxx; Ziyang Huang <hzyitc@xxxxxxxxxxx>
>Subject: [PATCH v2] usb: dwc2: drd: fix inconsistent mode if role-switch-
>default-mode="host"
>
>Some boards might use USB-A female connector for USB ports, however, the
>port could be connected to a dual-mode USB controller, making it also
>behaves as a peripheral device if male-to-male cable is connected.
>
>In this case, the dts looks like this:
>
>	&usb0 {
>		status = "okay";
>		dr_mode = "otg";
>		usb-role-switch;
>		role-switch-default-mode = "host";
>	};
>
>After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call
>dwc2_force_mode() with parameter host=false, which causes inconsistent mode
>- The hardware is in peripheral mode while the kernel status is in host
>mode.
>
>What we can do now is to call dwc2_drd_role_sw_set() to switch to device
>mode, and everything should work just fine now, even switching back to
>none(default) mode afterwards.
>
>Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support")
>Signed-off-by: Ziyang Huang <hzyitc@xxxxxxxxxxx>

Reviewed-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
Tested-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>


Thanks,
Minas


>---
>Changes since v1
>- Use corrent name in Signed-off-by
>
> drivers/usb/dwc2/drd.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c index
>d8d6493bc457..a8605b02115b 100644
>--- a/drivers/usb/dwc2/drd.c
>+++ b/drivers/usb/dwc2/drd.c
>@@ -35,7 +35,8 @@ static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
>
> 	spin_unlock_irqrestore(&hsotg->lock, flags);
>
>-	dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST));
>+	dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) ||
>+				(hsotg->role_sw_default_mode == USB_DR_MODE_HOST));
> }
>
> static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
>--
>2.34.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux