[AMD Official Use Only - General]
> -----Original Message-----
> From: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
> Sent: Monday, February 20, 2023 00:54
> To: Limonciello, Mario <Mario.Limonciello@xxxxxxx>
> Cc: Mathias Nyman <mathias.nyman@xxxxxxxxx>; Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx>; linux-usb@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; S-k, Shyam-sundar <Shyam-sundar.S-
> k@xxxxxxx>; Tsao, Anson <anson.tsao@xxxxxxx>; Gong, Richard
> <Richard.Gong@xxxxxxx>; Natikar, Basavaraj
> <Basavaraj.Natikar@xxxxxxx>; Oakes, Gregory
> <Gregory.Oakes@xxxxxxx>
> Subject: Re: [PATCH] usb: xhci: Workaround for runpm issue on AMD xHC
>
> Hi Mario,
>
> Mario Limonciello <mario.limonciello@xxxxxxx> 於 2023年2月20日 週一
> 上午11:14寫道：
> >
> > + a bunch of AMD guys
> >
> > Please don't submit quirks for AMD systems without talking to AMD about
> > if they make sense.
> Got it.
>
> >
> > On 2/15/23 01:58, AceLan Kao wrote:
> > > From: "Chia-Lin Kao (AceLan)" <acelan.kao@xxxxxxxxxxxxx>
> > >
> > > When the xHC host is runtime suspended, the device connects to it will
> be
> > > disconnected while trying to use it.
> > > The quirk in commit 2a632815683d ("usb: xhci: Workaround for S3 issue
> on
> > > AMD SNPS 3.0 xHC") also works for this issue, so added its ID to the
> > > quirk, too.
> > >
> > > 05:00.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Device
> [1022:1505] (prog-if 30 [XHCI])
> > > Subsystem: Dell Device [1028:0c3f]
> > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > Latency: 0, Cache Line Size: 64 bytes
> > > Interrupt: pin A routed to IRQ 60
> > > IOMMU group: 21
> > > Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=1M]
> > > Capabilities: <access denied>
> > > Kernel driver in use: xhci_hcd
> > > Kernel modules: xhci_pci
> > >
> > > [ 20.769275] xhci_hcd 0000:05:00.0: xHCI host not responding to stop
> endpoint command
> > > [ 20.771429] xhci_hcd 0000:05:00.0: xHCI host controller not responding,
> assume dead
> > > [ 20.771444] xhci_hcd 0000:05:00.0: HC died; cleaning up
> > > [ 20.771733] usb 5-1: USB disconnect, device number 2
> > >
> > > Cc: stable@xxxxxxxxxxxxxxx #v4.19+
> > > Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@xxxxxxxxxxxxx>
> >
> > Is this system that you're finding this bug already launched? This
> > looks like a BIOS bug.
> >
> > If it's not launched we should fix it from BIOS, reach out to AMD off
> > list to talk about it.
> This system is not launched yet, any hints about the BIOS issue?
> I tried to disable D3Cold, but the symptom is the same.
> The xHC enters D3Hot and then it can't be waken up.
OK thanks for confirming.
It's not something that has a configuration knob in BIOS.
Raise a ticket with AMD and it can be discussed there.
>
> >
> > > ---
> > > drivers/usb/host/xhci-pci.c | 4 +++-
> > > 1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> > > index fb988e4ea924..b8f6843a8cd1 100644
> > > --- a/drivers/usb/host/xhci-pci.c
> > > +++ b/drivers/usb/host/xhci-pci.c
> > > @@ -177,7 +177,9 @@ static void xhci_pci_quirks(struct device *dev,
> struct xhci_hcd *xhci)
> > > (pdev->device == 0x15e0 || pdev->device == 0x15e1))
> > > xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
> > >
> > > - if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device ==
> 0x15e5) {
> > > + if (pdev->vendor == PCI_VENDOR_ID_AMD &&
> > > + (pdev->device == 0x15e5 ||
> > > + pdev->device == 0x1505)) {
> > > xhci->quirks |= XHCI_DISABLE_SPARSE;
> > > xhci->quirks |= XHCI_RESET_ON_RESUME;
> > > }
> >
