Hi Jon,
W dniu 9.02.2023 o 13:53, Jon Hunter pisze:
The USB ethernet gadget driver implements its own print macros which
call printk. Device drivers should use the device prints that print the
device name. Fortunately, the same macro names are defined in the header
file 'linux/usb/composite.h' and these use the device prints. Therefore,
remove the local definitions in the USB ethernet gadget driver and use
those in 'linux/usb/composite.h'. The only difference is that now the
device name is printed instead of the ethernet interface name.
Tested using ethernet gadget on Jetson AGX Orin.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
Tested-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
V3: Added this patch and dropped the patch in V2 that improved some of
the prints.
drivers/usb/gadget/function/u_ether.c | 36 +--------------------------
1 file changed, 1 insertion(+), 35 deletions(-)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 8f12f3f8f6ee..740331882e8d 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -17,6 +17,7 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
+#include <linux/usb/composite.h>
#include "u_ether.h"
@@ -103,41 +104,6 @@ static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
/*-------------------------------------------------------------------------*/
-/* REVISIT there must be a better way than having two sets
- * of debug calls ...
- */
-
-#undef DBG
-#undef VDBG
-#undef ERROR
-#undef INFO
-
-#define xprintk(d, level, fmt, args...) \
- printk(level "%s: " fmt , (d)->net->name , ## args)
-
-#ifdef DEBUG
-#undef DEBUG
-#define DBG(dev, fmt, args...) \
- xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev, fmt, args...) \
- do { } while (0)
-#endif /* DEBUG */
Actually there are more (at least hypothetical) changes than the declared
change of printed device name.
If DEBUG is not set there can be _more_ messages printed
when your patch is applied as-is (i.e. all DBG() invocations will
expand into some dev_dbg(), whereas before the patch is applied
they compile into nothing).
-
-#ifdef VERBOSE_DEBUG
-#define VDBG DBG
-#else
-#define VDBG(dev, fmt, args...) \
- do { } while (0)
-#endif /* DEBUG */
In the same spirit, the above block could be considered valid.
Not sure, how much of an issue it is, though.
Regards,
Andrzej
-
-#define ERROR(dev, fmt, args...) \
- xprintk(dev , KERN_ERR , fmt , ## args)
-#define INFO(dev, fmt, args...) \
- xprintk(dev , KERN_INFO , fmt , ## args)
-
-/*-------------------------------------------------------------------------*/
-
/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
