RE: [PATCH v2 00/12] ADD USB3.1 HOST, Peri and DRD support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

Thanks for the feedback.

> Subject: Re: [PATCH v2 00/12] ADD USB3.1 HOST, Peri and DRD support
> 
> On Thu, Jan 12, 2023 at 09:58:54PM +0000, Biju Das wrote:
> > This patch series aims to add USB3.1 HOST, Peri and DRD support on
> > RZ/V2M EVK platform.
> >
> > The reset for both host and peri are located in USB3DRD block. The
> > USB3DRD registers are mapped in the AXI address space of the
> > Peripheral module.
> >
> > RZ/V2M XHCI is similar to R-Car XHCI but it doesn't require any
> > firmware.
> >
> > Host/device needs to do reset release and set the host/device function
> > on DRD module, before accessing any registers.
> 
> After applying this series and building it on x86_64 I get the following
> build errors:
> 
> ERROR: modpost: "rzv2m_usb3drd_reset" [drivers/usb/host/xhci-plat-hcd.ko]
> undefined!
> ERROR: modpost: "rzv2m_usb3drd_reset"
> [drivers/usb/gadget/udc/renesas_usb3.ko] undefined!

The file drivers/usb/gadget/udc/rzv2m_usb3drd.c is not getting compiled,

If USB_RZV2M_USB3DRD=y, USB_XHCI_RZV2M=m and USB_RENESAS_USB3=m and 
Because of that modpost is giving undefined error.

So I have updated the KCONFIG like below and now it builds OK now. I will send next version
based on this, if there are no comments.

-- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -180,10 +180,17 @@ config USB_RENESAS_USBHS_UDC
           gadget drivers to also be dynamically linked.
 
 config USB_RZV2M_USB3DRD
+       tristate 'Renesas USB3.1 DRD controller'
        depends on ARCH_R9A09G011 || COMPILE_TEST
-       bool
-       default y if USB_XHCI_RZV2M
-       default y if USB_RENESAS_USB3
+       default y if USB_XHCI_RZV2M=y
+       default y if USB_RENESAS_USB3=y
+       default m if (USB_XHCI_RZV2M=m && USB_RENESAS_USB3=m)
+       help
+          Renesas USB3.1 DRD controller is a USB DRD controller
+          that supports both host and device switching.
+
+          Say "y" to link the driver statically, or "m" to build a
+          dynamically linked module called "rzv2m_usb3drd".
 
 config USB_RENESAS_USB3
        tristate 'Renesas USB3.0 Peripheral controller'
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 7414facce10f..2b80ce9587c1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -54,6 +54,7 @@ config USB_XHCI_PCI_RENESAS
 config USB_XHCI_PLATFORM
        tristate "Generic xHCI driver for a platform device"
        select USB_XHCI_RCAR if ARCH_RENESAS
+       select USB_XHCI_RZV2M if ARCH_R9A09G011

Cheers,
Biju




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux