On Wed, 11 Jan 2023 01:53:21 +0000 Andre Przywara <andre.przywara@xxxxxxx> wrote: Hi, > this is mostly a rebase of the former v4 series. > It is based on top of v6.2-rc1, and builds cleanly there. For passing > make dtbs_check, the PHY binding patch, part of a separate series[1], is > needed. For USB functionality, patch 2/3 from there is needed as well. This series has now been taken by Vinod and is available in linux-next since at least Friday. > I put a tree with both series combined here: > https://github.com/apritzel/linux/commits/f1c100s-usb-v5 > > There were no changes to the actual patches, this is just a resend since > the series missed the previous merge window. Is there anything I can do to move this series forward? If I see this correctly, this just misses a review of patch v5 03/11 "usb: musb: sunxi: Introduce config struct". I addressed Jernej's comments on this already in v4. Cheers, Andre > [1] https://lore.kernel.org/linux-phy/20230109012223.4079299-1-andre.przywara@xxxxxxx/ > > ================ > This patchset introduces support for F1C100s' USB, and the SourceParts > PopStick and Lctech Pi boards. > > The DT binding and driver support for SUNIV USB MUSB device are added, in > addition to DT changes to the DTSI and Lichee Nano DT. New DTs are added > for the SourceParts PopStick v1.1 and Lctech Pi boards. > > Changelog v4 ... v5: > - Rebase on top to v6.2-rc1 > > Changelog v3 ... v4: > - Dropped the PHY patches, they go via a different tree and need a > different base > - rebased on top of linux-sunxi/sunxi/for-next (provides H616 USB) > - musb DT binding: use enum > - musb cleanup: use musb_hdrc_config config pointer directly > - musb cleanup: use const where possible > - drop partitions from Popstick DTS file > - clarify Popstick has a USB type-A *plug* > - add tags > > Changelog v2 ... v3: > - remove redundant "Device Tree Bindings" suffix in DT binding doc title > - add BSD license to binding doc file (as per checkpatch) > - fix some commit message title prefixes > - use proper plural spelling for usb0_id_det-gpios > - popstick.dts: Reorder otg_sram node reference alphabetically > - popstick.dts: Add regulator- prefix to 3.3V regulator node name > - popstick.dts: Fix status, compatible and reg property order > - popstick.dts: Drop unneeded mmc0 and spi0 aliases > - add patch to clean up sunxi MUSB driver > - add Acks and Reviewed-by's > > Changelog v1 ... v2: > - USB PHY binding: clarify the relation with other phy-sun4i-usb bindings > - Add Popstick binding and .dts patches > > > Andre Przywara (4): > usb: musb: sunxi: Introduce config struct > dt-bindings: vendor-prefixes: add Lctech name > dt-bindings: arm: sunxi: add compatible strings for Lctech Pi > ARM: dts: suniv: Add Lctech Pi F1C200s devicetree > > Icenowy Zheng (7): > dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string > usb: musb: sunxi: add support for the F1C100s MUSB controller > ARM: dts: suniv: add USB-related device nodes > ARM: dts: suniv: licheepi-nano: enable USB > dt-bindings: vendor-prefixes: add Source Parts > dt-binding: arm: sunxi: add compatible strings for PopStick v1.1 > ARM: dts: suniv: add device tree for PopStick v1.1 > > .../devicetree/bindings/arm/sunxi.yaml | 13 +++ > .../usb/allwinner,sun4i-a10-musb.yaml | 10 +- > .../devicetree/bindings/vendor-prefixes.yaml | 4 + > arch/arm/boot/dts/Makefile | 4 +- > .../boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 +++ > arch/arm/boot/dts/suniv-f1c100s.dtsi | 32 ++++++ > arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts | 76 ++++++++++++++ > .../boot/dts/suniv-f1c200s-popstick-v1.1.dts | 81 +++++++++++++++ > drivers/usb/musb/sunxi.c | 99 +++++++++++++------ > 9 files changed, 301 insertions(+), 34 deletions(-) > create mode 100644 arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts > create mode 100644 arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts > > > base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2 > prerequisite-patch-id: 7734c0032dcc073e59f0217ee47ff023f0b47bcf
