Re: [PATCH 3/4] usb: remove OMAP USB Device Controller and OHCI support for OMAP1/2 chips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 12, 2023, at 09:37, Lukas Bulwahn wrote:
> Commit 0fee2eac5c2b ("usb: phy: remove phy-isp1301-omap driver") removes
> the Philips ISP1301 with OMAP OTG driver and its corresponding config
> ISP1301_OMAP. The drivers, OMAP USB Device Controller and OHCI support for
> OMAP1/2 chips, with corresponding configs, USB_OMAP and USB_OHCI_HCD_OMAP1,
> need this removed driver (see "depends on ISP1301_OMAP") to build.
>
> Remove those two drivers.
>
> With the config USB_OMAP removed in this commit, remove some further code
> in the omap-dma header and mach-omap1 architecture code.
>
> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>

This would be a great cleanup because of the simplications of the
omap-dma code. I had previously looked at it and concluded that
the driver is still in use though, and I think my mistake was
just in the Kconfig part of this patch:

commit c32fd10914a314dd96c5d24030200070c84df5f1
Author: Arnd Bergmann <arnd@xxxxxxxx>
Date:   Thu Sep 29 15:38:56 2022 +0200

    ARM: omap1: remove unused board files
    
    All board support that was marked as 'unused' earlier can
    now be removed, leaving the five machines that that still
    had someone using them in 2022, or that are supported in
    qemu.
    
    Cc: Aaro Koskinen <aaro.koskinen@xxxxxx>
    Cc: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
    Cc: Tony Lindgren <tony@xxxxxxxxxxx>
    Cc: linux-omap@xxxxxxxxxxxxxxx
    Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index b3006d8b04ab..95751062078e 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -118,7 +118,7 @@ config USB_GR_UDC
 config USB_OMAP
        tristate "OMAP USB Device Controller"
        depends on ARCH_OMAP1
-       depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
+       depends on ISP1301_OMAP
        help
           Many Texas Instruments OMAP processors have flexible full
           speed USB device controllers, with support for up to 30
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0442dc4bc334..a0c14c62ff32 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -409,7 +409,7 @@ if USB_OHCI_HCD
 config USB_OHCI_HCD_OMAP1
        tristate "OHCI support for OMAP1/2 chips"
        depends on ARCH_OMAP1
-       depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
+       depends on ISP1301_OMAP
        default y
        help
          Enables support for the OHCI controller on OMAP1/2 chips.

Instead of changing this to 'depends on ISP1301_OMAP', the line
probably should just be dropped entirely.

      Arnd



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux