I am trying to get "USB Networking" to work with a 2Wire 2700HGV ADSL
router. (This is actually a BT Home Hub)
The hardware is recognising the router as a valid USB device but I'm
getting errors, the following is an extract from /var/log/syslog:-
Oct 27 20:02:57 server kernel: [ 137.932054] usb 2-2: new full speed USB device using ohci_hcd and address 4
Oct 27 20:02:57 server kernel: [ 138.144588] usb 2-2: configuration #1 chosen from 1 choice
Oct 27 20:02:57 server kernel: [ 138.267304] usbcore: registered new interface driver cdc_ether
Oct 27 20:02:57 server kernel: [ 138.516030] rndis_host 2-2:1.0: RNDIS init failed, -110
Oct 27 20:02:57 server kernel: [ 138.516137] rndis_host: probe of 2-2:1.0 failed with error -110
Oct 27 20:02:57 server kernel: [ 138.516189] usbcore: registered new interface driver rndis_host
Oct 27 20:02:58 server kernel: [ 138.808034] rndis_wlan 2-2:1.0: RNDIS init failed, -110
Oct 27 20:02:58 server kernel: [ 138.808191] rndis_wlan: probe of 2-2:1.0 failed with error -110
Oct 27 20:02:58 server kernel: [ 138.808246] usbcore: registered new interface driver rndis_wlan
The error is just about identical on both a xubuntu 9.04 (kernel 2.6.28-16)
and a xubuntu 9.10 system (kernel 2.6.31-14).
... and here is the output from 'lsusb -v' for the 2Wire :-
Bus 002 Device 004: ID 1630:0042
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1630
idProduct 0x0042
bcdDevice 1.00
iManufacturer 1 2Wire Inc
iProduct 2 2Wire USB Remote NDIS Ethernet
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 2WIREHPL
bmAttributes 0xc0
Self Powered
MaxPower 40mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 255 Vendor Specific (MSFT RNDIS?)
iInterface 5 ndis5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
CDC Header:
bcdCDC 1.00
CDC Call Management:
bmCapabilities 0x00
bDataInterface 1
CDC ACM:
bmCapabilities 0x00
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 6 ethernet
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0001
Self Powered
I've hunted pretty hard but can't find exactly this problem or a fix.
Can anyone here help? I'm quite happy to try some diagnosis, the
system I want to connect to the 2Wire is new so not yet configured and
thus I can do what I like to it. I can even build kernels if
necessary though I'd prefer not to! :-)
--
Chris Green
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
