[PATCH AUTOSEL 5.15 09/14] xhci: disable U3 suspended ports in S4 hibernate poweroff_late stage

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>

[ Upstream commit c3bbacd61baace2f4fbab17012c3d149df2d50f1 ]

Disable U3 suspended ports in hibernate S4 poweroff_late for systems
with XHCI_RESET_TO_DEFAULT quirk, if wakeup is not enabled.

This reduces the number of self-powered usb devices from surviving in
U3 suspended state into next reboot.

Bootloader/firmware on these systems can't handle usb ports in U3, and
will timeout, causing extra delay during reboot/restore from S4.

Add pci_poweroff_late() callback to struct usb_hcd to get this done at
the correct stage in hibernate.

Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20221130091944.2171610-5-mathias.nyman@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/usb/core/hcd-pci.c  | 13 ++++++++++
 drivers/usb/host/xhci-pci.c | 52 +++++++++++++++++++++++++++++++++++++
 include/linux/usb/hcd.h     |  3 +++
 3 files changed, 68 insertions(+)

diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 5af810cd8a58..93b04b8ef94f 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -564,6 +564,17 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 	return retval;
 }
 
+static int hcd_pci_poweroff_late(struct device *dev)
+{
+	struct pci_dev		*pci_dev = to_pci_dev(dev);
+	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
+
+	if (hcd->driver->pci_poweroff_late && !HCD_DEAD(hcd))
+		return hcd->driver->pci_poweroff_late(hcd, device_may_wakeup(dev));
+
+	return 0;
+}
+
 static int hcd_pci_resume_noirq(struct device *dev)
 {
 	powermac_set_asic(to_pci_dev(dev), 1);
@@ -584,6 +595,7 @@ static int hcd_pci_restore(struct device *dev)
 
 #define hcd_pci_suspend		NULL
 #define hcd_pci_suspend_noirq	NULL
+#define hcd_pci_poweroff_late	NULL
 #define hcd_pci_resume_noirq	NULL
 #define hcd_pci_resume		NULL
 #define hcd_pci_restore		NULL
@@ -621,6 +633,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = {
 	.thaw_noirq	= NULL,
 	.thaw		= hcd_pci_resume,
 	.poweroff	= hcd_pci_suspend,
+	.poweroff_late	= hcd_pci_poweroff_late,
 	.poweroff_noirq	= hcd_pci_suspend_noirq,
 	.restore_noirq	= hcd_pci_resume_noirq,
 	.restore	= hcd_pci_restore,
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index fdf083196528..d908e2092ad0 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -621,6 +621,57 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	return retval;
 }
 
+static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct xhci_port	*port;
+	struct usb_device	*udev;
+	unsigned int		slot_id;
+	u32			portsc;
+	int			i;
+
+	/*
+	 * Systems with XHCI_RESET_TO_DEFAULT quirk have boot firmware that
+	 * cause significant boot delay if usb ports are in suspended U3 state
+	 * during boot. Some USB devices survive in U3 state over S4 hibernate
+	 *
+	 * Disable ports that are in U3 if remote wake is not enabled for either
+	 * host controller or connected device
+	 */
+
+	if (!(xhci->quirks & XHCI_RESET_TO_DEFAULT))
+		return 0;
+
+	for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
+		port = &xhci->hw_ports[i];
+		portsc = readl(port->addr);
+
+		if ((portsc & PORT_PLS_MASK) != XDEV_U3)
+			continue;
+
+		slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci,
+						    port->hcd_portnum + 1);
+		if (!slot_id || !xhci->devs[slot_id]) {
+			xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n",
+				 slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
+			continue;
+		}
+
+		udev = xhci->devs[slot_id]->udev;
+
+		/* if wakeup is enabled then don't disable the port */
+		if (udev->do_remote_wakeup && do_wakeup)
+			continue;
+
+		xhci_dbg(xhci, "port %d-%d in U3 without wakeup, disable it\n",
+			 port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
+		portsc = xhci_port_state_to_neutral(portsc);
+		writel(portsc | PORT_PE, port->addr);
+	}
+
+	return 0;
+}
+
 static void xhci_pci_shutdown(struct usb_hcd *hcd)
 {
 	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
@@ -687,6 +738,7 @@ static int __init xhci_pci_init(void)
 #ifdef CONFIG_PM
 	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
 	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+	xhci_pci_hc_driver.pci_poweroff_late = xhci_pci_poweroff_late;
 	xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
 #endif
 	return pci_register_driver(&xhci_pci_driver);
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 98d1921f02b1..f80bf9fd1a26 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -283,6 +283,9 @@ struct hc_driver {
 	/* called after entering D0 (etc), before resuming the hub */
 	int	(*pci_resume)(struct usb_hcd *hcd, bool hibernated);
 
+	/* called just before hibernate final D3 state, allows host to poweroff parts */
+	int	(*pci_poweroff_late)(struct usb_hcd *hcd, bool do_wakeup);
+
 	/* cleanly make HCD stop writing memory and doing I/O */
 	void	(*stop) (struct usb_hcd *hcd);
 
-- 
2.35.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux