Some platforms(for eg: RZ/V2M EVK) does not have interrupt pin connected to HD3SS3220. Add polling support for role detection. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- drivers/usb/typec/hd3ss3220.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c index 666a93f7ec65..9894fa96cc5f 100644 --- a/drivers/usb/typec/hd3ss3220.c +++ b/drivers/usb/typec/hd3ss3220.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/usb/role.h> #include <linux/usb/typec.h> +#include <linux/workqueue.h> #define HD3SS3220_REG_CN_STAT_CTRL 0x09 #define HD3SS3220_REG_GEN_CTRL 0x0A @@ -37,6 +38,9 @@ struct hd3ss3220 { struct regmap *regmap; struct usb_role_switch *role_sw; struct typec_port *port; + struct delayed_work output_poll_work; + enum usb_role role_state; + bool poll; }; static int hd3ss3220_set_source_pref(struct hd3ss3220 *hd3ss3220, int src_pref) @@ -118,6 +122,22 @@ static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220) default: break; } + + hd3ss3220->role_state = role_state; +} + +static void output_poll_execute(struct work_struct *work) +{ + struct delayed_work *delayed_work = to_delayed_work(work); + struct hd3ss3220 *hd3ss3220 = container_of(delayed_work, + struct hd3ss3220, + output_poll_work); + enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220); + + if (hd3ss3220->role_state != role_state) + hd3ss3220_set_role(hd3ss3220); + + schedule_delayed_work(&hd3ss3220->output_poll_work, HZ); } static irqreturn_t hd3ss3220_irq(struct hd3ss3220 *hd3ss3220) @@ -227,6 +247,9 @@ static int hd3ss3220_probe(struct i2c_client *client, "hd3ss3220", &client->dev); if (ret) goto err_unreg_port; + } else { + INIT_DELAYED_WORK(&hd3ss3220->output_poll_work, output_poll_execute); + hd3ss3220->poll = true; } ret = i2c_smbus_read_byte_data(client, HD3SS3220_REG_DEV_REV); @@ -235,6 +258,9 @@ static int hd3ss3220_probe(struct i2c_client *client, fwnode_handle_put(connector); + if (hd3ss3220->poll) + schedule_delayed_work(&hd3ss3220->output_poll_work, HZ); + dev_info(&client->dev, "probed revision=0x%x\n", ret); return 0; @@ -252,6 +278,9 @@ static void hd3ss3220_remove(struct i2c_client *client) { struct hd3ss3220 *hd3ss3220 = i2c_get_clientdata(client); + if (hd3ss3220->poll) + cancel_delayed_work_sync(&hd3ss3220->output_poll_work); + typec_unregister_port(hd3ss3220->port); usb_role_switch_put(hd3ss3220->role_sw); } -- 2.25.1