On 01/12/2022 14:49, Dan Scally wrote: > Hello - thanks for the patch > > On 01/12/2022 12:21, Szymon Heidrich wrote: >> Setup function uvc_function_setup > > > You've written uvc_function_setup here, but the code changes uvc_function_ep0_complete. Yes, this was intentional as uvc_function_setup prevents handling of control transfer requests with wLength grater than UVC_MAX_REQUEST_SIZE. The uvc_function_ep0_complete function handles data phase thus was modified. > >> permits control transfer >> requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), >> data stage handler for OUT transfer uses memcpy to copy req->actual >> bytes to uvc_event->data.data array of size 60. This may result >> in an overflow of 4 bytes. >> >> Signed-off-by: Szymon Heidrich <szymon.heidrich@xxxxxxxxx> > > > Good catch > >> --- >> drivers/usb/gadget/function/f_uvc.c | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c >> index 6e196e061..69c5eb3a3 100644 >> --- a/drivers/usb/gadget/function/f_uvc.c >> +++ b/drivers/usb/gadget/function/f_uvc.c >> @@ -216,8 +216,9 @@ uvc_function_ep0_complete(struct usb_ep *ep, struct usb_request *req) >> memset(&v4l2_event, 0, sizeof(v4l2_event)); >> v4l2_event.type = UVC_EVENT_DATA; >> - uvc_event->data.length = req->actual; >> - memcpy(&uvc_event->data.data, req->buf, req->actual); >> + uvc_event->data.length = (req->actual > sizeof(uvc_event->data.data) ? >> + sizeof(uvc_event->data.data) : req->actual); > > > There's a clamp() macro in f_uvc.c, can we use that? > >> + memcpy(&uvc_event->data.data, req->buf, uvc_event->data.length); >> v4l2_event_queue(&uvc->vdev, &v4l2_event); >> } >> } If it is more appropriate I will use min_t(unsigned int, req->actual, sizeof(uvc_event->data.data)).
