On Sun, Nov 27, 2022 at 03:31:37PM +0800, Icenowy Zheng wrote:
> This is a 4-port USB 2.0 STT hub.
The commit message is supposed the describe the change, which
is almost certainly not a 4-port USB 2.0 STT hub :)
It could be something like "Add support for the Genesys Logic
GL850G, which is a 4-port USB 2.0 STT hub."
>
> Signed-off-by: Icenowy Zheng <uwu@xxxxxxxxxx>
> ---
> drivers/usb/misc/onboard_usb_hub.c | 2 ++
> drivers/usb/misc/onboard_usb_hub.h | 5 +++++
> 2 files changed, 7 insertions(+)
>
> diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
> index d63c63942af1..f5c71d724be6 100644
> --- a/drivers/usb/misc/onboard_usb_hub.c
> +++ b/drivers/usb/misc/onboard_usb_hub.c
> @@ -334,6 +334,7 @@ static struct platform_driver onboard_hub_driver = {
> #define VENDOR_ID_MICROCHIP 0x0424
> #define VENDOR_ID_REALTEK 0x0bda
> #define VENDOR_ID_TI 0x0451
> +#define VENDOR_ID_GENESYS 0x05e3
Please insert the new entry in alphabetical order, i.e. before
VENDOR_ID_MICROCHIP.
>
> /*
> * Returns the onboard_hub platform device that is associated with the USB
> @@ -414,6 +415,7 @@ static const struct usb_device_id onboard_hub_id_table[] = {
> { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
> { USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
> { USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
> + { USB_DEVICE(VENDOR_ID_GENESYS, 0x0608) }, /* Genesys Logic GL850G USB 2.0 */
Same here, the table is ordered alphabetically
> {}
> };
> MODULE_DEVICE_TABLE(usb, onboard_hub_id_table);
> diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
> index 34beab8bce3d..1ca188713b1f 100644
> --- a/drivers/usb/misc/onboard_usb_hub.h
> +++ b/drivers/usb/misc/onboard_usb_hub.h
> @@ -22,6 +22,10 @@ static const struct onboard_hub_pdata ti_tusb8041_data = {
> .reset_us = 3000,
> };
>
> +static const struct onboard_hub_pdata genesys_gl850g_data = {
> + .reset_us = 3,
> +};
> +
> static const struct of_device_id onboard_hub_match[] = {
> { .compatible = "usb424,2514", .data = µchip_usb424_data, },
> { .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
> @@ -30,6 +34,7 @@ static const struct of_device_id onboard_hub_match[] = {
> { .compatible = "usbbda,5411", .data = &realtek_rts5411_data, },
> { .compatible = "usbbda,414", .data = &realtek_rts5411_data, },
> { .compatible = "usbbda,5414", .data = &realtek_rts5411_data, },
> + { .compatible = "usb5e3,608", .data = &genesys_gl850g_data, },
These table is ordered by compatible string, the new entry should be
inserted after "usb451,8142".
Thanks
m.
