Re: [PATCH 2/6] dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 27 Nov 2022 15:31:36 +0800, Icenowy Zheng wrote:
> The Genesys Logic GL850G is a USB 2.0 Single TT hub controller that
> features 4 downstream ports, an internal 5V-to-3.3V LDO regulator (can
> be bypassed) and an external reset pin.
> 
> Add a device tree binding for its USB protocol part. The internal LDO is
> not covered by this and can just be modelled as a fixed regulator.
> 
> Signed-off-by: Icenowy Zheng <uwu@xxxxxxxxxx>
> ---
>  .../bindings/usb/genesys,gl850g.yaml          | 48 +++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/usb/genesys,gl850g.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml: duplicate '$id' value 'http://devicetree.org/schemas/usb/realtek,rts5411.yaml#'
Error: Documentation/devicetree/bindings/usb/genesys,gl850g.example.dts:26.41-42 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:406: Documentation/devicetree/bindings/usb/genesys,gl850g.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1492: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221127073140.2093897-3-uwu@xxxxxxxxxx

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command.




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux