[PATCH] net/cdc_ncm: Fix multicast RX support for CDC NCM devices with ZLP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ZLP for DisplayLink ethernet devices was enabled in 6.0:
266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet devices").
The related driver_info should be the "same as cdc_ncm_info, but with
FLAG_SEND_ZLP". However, set_rx_mode that enables handling multicast
traffic was missing in the new cdc_ncm_zlp_info.

usbnet_cdc_update_filter rx mode was introduced in linux 5.9 with:
e10dcb1b6ba7 ("net: cdc_ncm: hook into set_rx_mode to admit multicast
traffic")

Without this hook, multicast, and then IPv6 SLAAC, is broken.

Fixes: 266c0190aee3 ("net/cdc_ncm: Enable ZLP for DisplayLink ethernet
devices")

Signed-off-by: Santiago Ruano Rincón <santiago.ruano-rincon@xxxxxxxxxxxxxxxxx>
---
 drivers/net/usb/cdc_ncm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 8d5cbda33f66..0897fdb6254b 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1915,6 +1915,7 @@ static const struct driver_info cdc_ncm_zlp_info = {
 	.status = cdc_ncm_status,
 	.rx_fixup = cdc_ncm_rx_fixup,
 	.tx_fixup = cdc_ncm_tx_fixup,
+	.set_rx_mode = usbnet_cdc_update_filter,
 };
 
 /* Same as cdc_ncm_info, but with FLAG_WWAN */
-- 
2.38.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux