On 10/16/2009 05:31 PM, Oliver Neukum wrote:
Am Freitag, 16. Oktober 2009 23:20:09 schrieb Andrew Morton:
Plugged joystick in and kernel detects device (from /var/log/messages):
kernel: usb 3-6: new low speed USB device using ohci_hcd and address 3
kernel: usb 3-6: New USB device found, idVendor=068e, idProduct=00d3
kernel: usb 3-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0 kernel: usb 3-6: Product: CH OEM 3 AXIS 5 BUTTON JOYSTICK
kernel: usb 3-6: Manufacturer: CH PRODUCTS
kernel: usb 3-6: configuration #1 chosen from 1 choice
kernel: input: CH PRODUCTS CH OEM 3 AXIS 5 BUTTON JOYSTICK as
/devices/pci0000:00/0000:00:02.0/usb3/3-6/3-6:1.0/input/input8
kernel: generic-usb 0003:068E:00D3.0004: input,hidraw3: USB HID v1.00
Joystick [CH PRODUCTS CH OEM 3 AXIS 5 BUTTON JOYSTICK] on
usb-0000:00:02.0-6/input0
HAL also detects the device (from lshal): attached as hal.txt
Functionality was checked for under jstest, jscal, KDE 4 joystick section
in System Settings, and by cat-ing the device. In all tests the axis
values did not change, and the button states did not change when joystick
manipulated
Do you see traffic with usbmon as you move the stick or press buttons?
Regards
Oliver
.
No traffic was shown from usbmon other than the connect/disconnect stuff.
- Keith
--
Keith Rutkowski
Software Engineer
Signature Research, Inc
www.signatureresearchinc.com
Email: rutkowski@xxxxxxxxxxxxxxxxxxxxxxxx
Phone: (906) 337-3360
Fax: (906) 337-0023
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
