If the device node of dvb_frontend is open() and the device is disconnected, many kinds of UAFs may occur when calling close() on the device node. The root cause of this is that wake_up() for dvbdev->wait_queue is implemented in the dvb_frontend_release() function, but wait_event() is not implemented in the dvb_frontend_stop() function. So, implement wait_event() function in dvb_frontend_stop() and add 'remove_mutex' which prevents race condition for 'fe->exit'. Signed-off-by: Hyunwoo Kim <imv4bel@xxxxxxxxx> --- drivers/media/dvb-core/dvb_frontend.c | 39 +++++++++++++++++++++++---- include/media/dvb_frontend.h | 6 ++++- 2 files changed, 39 insertions(+), 6 deletions(-) diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c index 48e735cdbe6b..b3556e3580c6 100644 --- a/drivers/media/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -809,6 +809,8 @@ static void dvb_frontend_stop(struct dvb_frontend *fe) dev_dbg(fe->dvb->device, "%s:\n", __func__); + mutex_lock(&fe->remove_mutex); + if (fe->exit != DVB_FE_DEVICE_REMOVED) fe->exit = DVB_FE_NORMAL_EXIT; mb(); @@ -818,6 +820,13 @@ static void dvb_frontend_stop(struct dvb_frontend *fe) kthread_stop(fepriv->thread); + mutex_unlock(&fe->remove_mutex); + + if (fepriv->dvbdev->users < -1) { + wait_event(fepriv->dvbdev->wait_queue, + fepriv->dvbdev->users == -1); + } + sema_init(&fepriv->sem, 1); fepriv->state = FESTATE_IDLE; @@ -2750,9 +2759,13 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) struct dvb_adapter *adapter = fe->dvb; int ret; + mutex_lock(&fe->remove_mutex); + dev_dbg(fe->dvb->device, "%s:\n", __func__); - if (fe->exit == DVB_FE_DEVICE_REMOVED) + if (fe->exit == DVB_FE_DEVICE_REMOVED) { + mutex_unlock(&fe->remove_mutex); return -ENODEV; + } if (adapter->mfe_shared) { mutex_lock(&adapter->mfe_lock); @@ -2773,8 +2786,10 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) while (mferetry-- && (mfedev->users != -1 || mfepriv->thread)) { if (msleep_interruptible(500)) { - if (signal_pending(current)) + if (signal_pending(current)) { + mutex_unlock(&fe->remove_mutex); return -EINTR; + } } } @@ -2786,6 +2801,7 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) if (mfedev->users != -1 || mfepriv->thread) { mutex_unlock(&adapter->mfe_lock); + mutex_unlock(&fe->remove_mutex); return -EBUSY; } adapter->mfe_dvbdev = dvbdev; @@ -2845,6 +2861,8 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) if (adapter->mfe_shared) mutex_unlock(&adapter->mfe_lock); + + mutex_unlock(&fe->remove_mutex); return ret; err3: @@ -2866,6 +2884,8 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) err0: if (adapter->mfe_shared) mutex_unlock(&adapter->mfe_lock); + + mutex_unlock(&fe->remove_mutex); return ret; } @@ -2876,6 +2896,8 @@ static int dvb_frontend_release(struct inode *inode, struct file *file) struct dvb_frontend_private *fepriv = fe->frontend_priv; int ret; + mutex_lock(&fe->remove_mutex); + dev_dbg(fe->dvb->device, "%s:\n", __func__); if ((file->f_flags & O_ACCMODE) != O_RDONLY) { @@ -2897,11 +2919,17 @@ static int dvb_frontend_release(struct inode *inode, struct file *file) } mutex_unlock(&fe->dvb->mdev_lock); #endif - if (fe->exit != DVB_FE_NO_EXIT) - wake_up(&dvbdev->wait_queue); if (fe->ops.ts_bus_ctrl) fe->ops.ts_bus_ctrl(fe, 0); - } + + if (fe->exit != DVB_FE_NO_EXIT) { + mutex_unlock(&fe->remove_mutex); + wake_up(&dvbdev->wait_queue); + } else + mutex_unlock(&fe->remove_mutex); + + } else + mutex_unlock(&fe->remove_mutex); dvb_frontend_put(fe); @@ -3000,6 +3028,7 @@ int dvb_register_frontend(struct dvb_adapter *dvb, fepriv = fe->frontend_priv; kref_init(&fe->refcount); + mutex_init(&fe->remove_mutex); /* * After initialization, there need to be two references: one diff --git a/include/media/dvb_frontend.h b/include/media/dvb_frontend.h index e7c44870f20d..411ec32cd8df 100644 --- a/include/media/dvb_frontend.h +++ b/include/media/dvb_frontend.h @@ -686,7 +686,10 @@ struct dtv_frontend_properties { * @id: Frontend ID * @exit: Used to inform the DVB core that the frontend * thread should exit (usually, means that the hardware - * got disconnected. + * got disconnected.) + * @remove_mutex: mutex that avoids a race condition between a callback + * called when the hardware is disconnected and the + * file_operations of dvb_frontend */ struct dvb_frontend { @@ -704,6 +707,7 @@ struct dvb_frontend { int (*callback)(void *adapter_priv, int component, int cmd, int arg); int id; unsigned int exit; + struct mutex remove_mutex; }; /** -- 2.25.1