(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). Reportedly a post-2.6.28 regression. On Fri, 16 Oct 2009 15:17:14 GMT bugzilla-daemon@xxxxxxxxxxxxxxxxxxx wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=14421 > > Summary: CH Products joystick detected but not functional > Product: Drivers > Version: 2.5 > Kernel Version: >= 2.6.29 > Platform: All > OS/Version: Linux > Tree: Fedora > Status: NEW > Severity: normal > Priority: P1 > Component: USB > AssignedTo: greg@xxxxxxxxx > ReportedBy: rutkowski@xxxxxxxxxxxxxxxxxxxxxxxx > Regression: Yes > > > Created an attachment (id=23433) > --> (http://bugzilla.kernel.org/attachment.cgi?id=23433) > HAL detection of joystick > > CH Products 3-axis 5-button Joystick Product #: HG-434IS000-U-217 > > Tested on one system running Windows, Ubuntu 9.04, Fedora 10 and 11, and also > tested on 2 other systems running CentOS and Fedora 11 respectively. > > Properly detected but does not work on: > Fedora 11 > 2.6.30.8-64.fc11.x86_64 > 2.6.30.8-64.fc11.i586 > 2.6.29.4-167.fc11.x86_64 > 2.6.29.4-167.fc11.i586 > > Tested and fully functional on: > Ubuntu 9.04 > 2.6.28... - 32-bit > Fedora 10 > 2.6.27... - 32-bit > CentOS 5.? > 2.6.18-92.1.13.el5 - 64-bit > Windows XP SP2 - 32-bit > > Plugged joystick in and kernel detects device (from /var/log/messages): > kernel: usb 3-6: new low speed USB device using ohci_hcd and address 3 > kernel: usb 3-6: New USB device found, idVendor=068e, idProduct=00d3 > kernel: usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > kernel: usb 3-6: Product: CH OEM 3 AXIS 5 BUTTON JOYSTICK > kernel: usb 3-6: Manufacturer: CH PRODUCTS > kernel: usb 3-6: configuration #1 chosen from 1 choice > kernel: input: CH PRODUCTS CH OEM 3 AXIS 5 BUTTON JOYSTICK as > /devices/pci0000:00/0000:00:02.0/usb3/3-6/3-6:1.0/input/input8 > kernel: generic-usb 0003:068E:00D3.0004: input,hidraw3: USB HID v1.00 > Joystick [CH PRODUCTS CH OEM 3 AXIS 5 BUTTON JOYSTICK] on > usb-0000:00:02.0-6/input0 > > HAL also detects the device (from lshal): attached as hal.txt > > Functionality was checked for under jstest, jscal, KDE 4 joystick section in > System Settings, and by cat-ing the device. In all tests the axis values did > not change, and the button states did not change when joystick manipulated > (from jstest): > Joystick (CH PRODUCTS CH OEM 3 AXIS 5 BUTTON JOYSTICK) has 3 axes and 5 > buttons. Driver version is 2.1.0. > Testing ... (interrupt to exit) > Axes: 0: 0 1: 0 2: 0 Buttons: 0:off 1:off 2:off 3:off > 4:off > > (bytes from cat > /dev/input/by-id/usb-CH_PRODUCTS_CH_OEM_3_AXIS_5_BUTTON_JOYSTICK-joystick) > 4F 0A 5C 00 00 00 81 00 4F 0A 5C 00 00 00 81 01 4F 0A 5C 00 00 00 81 02 > 4F 0A 5C 00 00 00 81 03 4F 0A 5C 00 00 00 81 04 4F 0A 5C 00 00 00 82 00 > 4F 0A 5C 00 00 00 82 01 4F 0A 5C 00 00 00 82 02 > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
