On Thu, Nov 10, 2022 at 07:12:50PM +0800, Duke Xin(辛安文) wrote: > From: dukexinaw <602659072@xxxxxx> > > USB: serial: option: add Quectel EM05-G modem > > The EM05-G modem has 2 USB configurations that are configurable via the AT > command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with > the following interfaces, respectively: > > "RMNET" : AT + DIAG + NMEA + Modem + QMI > "MBIM" : MBIM + AT + DIAG + NMEA + Modem > > The detailed description of the USB configuration for each mode as follows: > > RMNET Mode > -------------- > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=2c7c ProdID=0311 Rev= 3.18 > S: Manufacturer=Quectel > S: Product=Quectel EM05-G > C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA > I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms > E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > MBIM Mode > -------------- > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=2c7c ProdID=0311 Rev= 3.18 > S: Manufacturer=Quectel > S: Product=Quectel EM05-G > C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA > A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 > I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim > E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms > I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > Signed-off-by: Duke Xin<duke_xinanwen@xxxxxxx> > Cc: stable@xxxxxxxxxxxxxxx > Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> > > Signed-off-by: dukexinaw <602659072@xxxxxx> > --- > Next/SHA1s | 368 ++ > Next/Trees | 370 ++ > Next/merge.log | 8938 +++++++++++++++++++++++++++++++++++ > drivers/usb/serial/option.c | 3 + > localversion-next | 1 + > 5 files changed, 9680 insertions(+) > create mode 100644 Next/SHA1s > create mode 100644 Next/Trees > create mode 100644 Next/merge.log > create mode 100644 localversion-next Something went really wrong with creating this patch. Please read the documentation and verify it before sending out a new version. thanks, greg k-h
