Re: [PATCH v3 10/11] phy: sun4i-usb: Replace types with explicit quirk flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



在 2022-11-10星期四的 13:04 +0530,Vinod Koul写道:
> On 06-11-22, 23:54, Icenowy Zheng wrote:
> > 
> > 
> > 于 2022年11月6日 GMT+08:00 下午11:48:25, Andre Przywara
> > <andre.przywara@xxxxxxx> 写到:
> > > So far we were assigning some crude "type" (SoC name, really) to
> > > each
> > > Allwinner USB PHY model, then guarding certain quirks based on
> > > this.
> > > This does not only look weird, but gets more or more cumbersome
> > > to
> > > maintain.
> > > 
> > > Remove the bogus type names altogether, instead introduce flags
> > > for each
> > > quirk, and explicitly check for them.
> > > This improves readability, and simplifies future extensions.
> > > 
> > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> > > ---
> > > drivers/phy/allwinner/phy-sun4i-usb.c | 50 ++++++++--------------
> > > -----
> > > 1 file changed, 15 insertions(+), 35 deletions(-)
> > > 
> > > diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
> > > b/drivers/phy/allwinner/phy-sun4i-usb.c
> > > index 51fb24c6dcb3..422129c66282 100644
> > > --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> > > +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> > > @@ -99,27 +99,17 @@
> > > #define DEBOUNCE_TIME                   msecs_to_jiffies(50)
> > > #define POLL_TIME                       msecs_to_jiffies(250)
> > > 
> > > -enum sun4i_usb_phy_type {
> > > -       sun4i_a10_phy,
> > > -       sun6i_a31_phy,
> > > -       sun8i_a33_phy,
> > > -       sun8i_a83t_phy,
> > > -       sun8i_h3_phy,
> > > -       sun8i_r40_phy,
> > > -       sun8i_v3s_phy,
> > > -       sun50i_a64_phy,
> > > -       sun50i_h6_phy,
> > > -};
> > > -
> > > struct sun4i_usb_phy_cfg {
> > >         int num_phys;
> > >         int hsic_index;
> > > -       enum sun4i_usb_phy_type type;
> > >         u32 disc_thresh;
> > >         u32 hci_phy_ctl_clear;
> > >         u8 phyctl_offset;
> > >         bool dedicated_clocks;
> > >         bool phy0_dual_route;
> > > +       bool phy2_is_hsic;
> > 
> > Maybe use a `int hsic_phy` instead? But the problem is this
> > practice is
> > assuming USB0 could not be HSIC -- although USB0 is usually OTG.
> 
> why should it be int.. dont think hsic_phy is improvement over
> phy2_is_hsic?

Yes because it may express phy1_is_hsic, etc (although this kind of
thing hadn't happened yet).

> 
> > 
> > > +       bool siddq_in_base;
> > > +       bool poll_vbusen;
> > >         int missing_phys;
> > > };
> > > 
> > > @@ -251,7 +241,7 @@ static void sun4i_usb_phy_passby(struct
> > > sun4i_usb_phy *phy, int enable)
> > >                 SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
> > > 
> > >         /* A83T USB2 is HSIC */
> > > -       if (phy_data->cfg->type == sun8i_a83t_phy && phy->index
> > > == 2)
> > > +       if (phy_data->cfg->phy2_is_hsic && phy->index == 2)
> > >                 bits |= SUNXI_EHCI_HS_FORCE |
> > > SUNXI_HSIC_CONNECT_INT |
> > >                         SUNXI_HSIC;
> > > 
> > > @@ -295,8 +285,7 @@ static int sun4i_usb_phy_init(struct phy
> > > *_phy)
> > >                 writel(val, phy->pmu + REG_HCI_PHY_CTL);
> > >         }
> > > 
> > > -       if (data->cfg->type == sun8i_a83t_phy ||
> > > -           data->cfg->type == sun50i_h6_phy) {
> > > +       if (data->cfg->siddq_in_base) {
> > >                 if (phy->index == 0) {
> > >                         val = readl(data->base + data->cfg-
> > > >phyctl_offset);
> > >                         val |= PHY_CTL_VBUSVLDEXT;
> > > @@ -340,8 +329,7 @@ static int sun4i_usb_phy_exit(struct phy
> > > *_phy)
> > >         struct sun4i_usb_phy_data *data =
> > > to_sun4i_usb_phy_data(phy);
> > > 
> > >         if (phy->index == 0) {
> > > -               if (data->cfg->type == sun8i_a83t_phy ||
> > > -                   data->cfg->type == sun50i_h6_phy) {
> > > +               if (data->cfg->siddq_in_base) {
> > >                         void __iomem *phyctl = data->base +
> > >                                 data->cfg->phyctl_offset;
> > > 
> > > @@ -414,9 +402,8 @@ static bool sun4i_usb_phy0_poll(struct
> > > sun4i_usb_phy_data *data)
> > >          * vbus using the N_VBUSEN pin on the pmic, so we must
> > > poll
> > >          * when using the pmic for vbus-det _and_ we're driving
> > > vbus.
> > >          */
> > > -       if ((data->cfg->type == sun6i_a31_phy ||
> > > -            data->cfg->type == sun8i_a33_phy) &&
> > > -           data->vbus_power_supply && data-
> > > >phys[0].regulator_on)
> > > +       if (data->cfg->poll_vbusen && data->vbus_power_supply &&
> > > +           data->phys[0].regulator_on)
> > >                 return true;
> > > 
> > >         return false;
> > > @@ -861,7 +848,6 @@ static int sun4i_usb_phy_probe(struct
> > > platform_device *pdev)
> > > 
> > > static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = {
> > >         .num_phys = 1,
> > > -       .type = sun4i_a10_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A10,
> > >         .dedicated_clocks = true,
> > > @@ -869,7 +855,6 @@ static const struct sun4i_usb_phy_cfg
> > > suniv_f1c100s_cfg = {
> > > 
> > > static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
> > >         .num_phys = 3,
> > > -       .type = sun4i_a10_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A10,
> > >         .dedicated_clocks = false,
> > > @@ -877,7 +862,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun4i_a10_cfg = {
> > > 
> > > static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
> > >         .num_phys = 2,
> > > -       .type = sun4i_a10_phy,
> > >         .disc_thresh = 2,
> > >         .phyctl_offset = REG_PHYCTL_A10,
> > >         .dedicated_clocks = false,
> > > @@ -885,15 +869,14 @@ static const struct sun4i_usb_phy_cfg
> > > sun5i_a13_cfg = {
> > > 
> > > static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
> > >         .num_phys = 3,
> > > -       .type = sun6i_a31_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A10,
> > >         .dedicated_clocks = true,
> > > +       .poll_vbusen = true,
> > > };
> > > 
> > > static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
> > >         .num_phys = 3,
> > > -       .type = sun4i_a10_phy,
> > >         .disc_thresh = 2,
> > >         .phyctl_offset = REG_PHYCTL_A10,
> > >         .dedicated_clocks = false,
> > > @@ -901,31 +884,31 @@ static const struct sun4i_usb_phy_cfg
> > > sun7i_a20_cfg = {
> > > 
> > > static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
> > >         .num_phys = 2,
> > > -       .type = sun6i_a31_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A10,
> > >         .dedicated_clocks = true,
> > > +       .poll_vbusen = true,
> > > };
> > > 
> > > static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
> > >         .num_phys = 2,
> > > -       .type = sun8i_a33_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A33,
> > >         .dedicated_clocks = true,
> > > +       .poll_vbusen = true,
> > > };
> > > 
> > > static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
> > >         .num_phys = 3,
> > >         .hsic_index = 2,
> > > -       .type = sun8i_a83t_phy,
> > >         .phyctl_offset = REG_PHYCTL_A33,
> > >         .dedicated_clocks = true,
> > > +       .siddq_in_base = true,
> > > +       .phy2_is_hsic = true,
> > > };
> > > 
> > > static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
> > >         .num_phys = 4,
> > > -       .type = sun8i_h3_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A33,
> > >         .dedicated_clocks = true,
> > > @@ -935,7 +918,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun8i_h3_cfg = {
> > > 
> > > static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
> > >         .num_phys = 3,
> > > -       .type = sun8i_r40_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A33,
> > >         .dedicated_clocks = true,
> > > @@ -945,7 +927,6 @@ static const struct sun4i_usb_phy_cfg
> > > sun8i_r40_cfg = {
> > > 
> > > static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
> > >         .num_phys = 1,
> > > -       .type = sun8i_v3s_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A33,
> > >         .dedicated_clocks = true,
> > > @@ -955,16 +936,15 @@ static const struct sun4i_usb_phy_cfg
> > > sun8i_v3s_cfg = {
> > > 
> > > static const struct sun4i_usb_phy_cfg sun20i_d1_cfg = {
> > >         .num_phys = 2,
> > > -       .type = sun50i_h6_phy,
> > >         .phyctl_offset = REG_PHYCTL_A33,
> > >         .dedicated_clocks = true,
> > >         .hci_phy_ctl_clear = PHY_CTL_SIDDQ,
> > >         .phy0_dual_route = true,
> > > +       .siddq_in_base = true,
> > > };
> > > 
> > > static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
> > >         .num_phys = 2,
> > > -       .type = sun50i_a64_phy,
> > >         .disc_thresh = 3,
> > >         .phyctl_offset = REG_PHYCTL_A33,
> > >         .dedicated_clocks = true,
> > > @@ -974,11 +954,11 @@ static const struct sun4i_usb_phy_cfg
> > > sun50i_a64_cfg = {
> > > 
> > > static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = {
> > >         .num_phys = 4,
> > > -       .type = sun50i_h6_phy,
> > >         .phyctl_offset = REG_PHYCTL_A33,
> > >         .dedicated_clocks = true,
> > >         .phy0_dual_route = true,
> > >         .missing_phys = BIT(1) | BIT(2),
> > > +       .siddq_in_base = true,
> > > };
> > > 
> > > static const struct of_device_id sun4i_usb_phy_of_match[] = {
> 





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux