The change breaks device tree based platforms with PHY device and use
usb-role-switch instead of an extcon switch. extcon_find_edev_by_node()
will return EPROBE_DEFER if it can not find a device so probing without
an extcon device will be deferred indefinitely. Fix this by
explicitly checking for usb-role-switch.
At least the out-of-tree USB3 support on Apple silicon based platforms
using dwc3 with tipd USB Type-C and PD controller is affected by this
issue.
Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present")
Cc: stable@xxxxxxxxxx
Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c0e7c76dc5c8..1f348bc867c2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1710,6 +1710,16 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
return extcon_get_extcon_dev(name);
+ /*
+ * Check explicitly if "usb-role-switch" is used since
+ * extcon_find_edev_by_node() can not be used to check the absence of
+ * an extcon device. In the absence of an device it will always return
+ * EPROBE_DEFER.
+ */
+ if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) &&
+ device_property_read_bool(dev, "usb-role-switch"))
+ return NULL;
+
/*
* Try to get an extcon device from the USB PHY controller's "port"
* node. Check if it has the "port" node first, to avoid printing the
--
2.37.3
