Hi Icenowy,
Dne sreda, 12. oktober 2022 ob 07:55:56 CEST je Icenowy Zheng napisal(a):
> The F1C100s SoC has one USB OTG port connected to a MUSB controller.
>
> Add support for its USB PHY.
>
> Signed-off-by: Icenowy Zheng <uwu@xxxxxxxxxx>
> ---
> No changes since v1.
>
> drivers/phy/allwinner/phy-sun4i-usb.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c
> b/drivers/phy/allwinner/phy-sun4i-usb.c index 3a3831f6059a..2f94cb77637b
> 100644
> --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> @@ -109,6 +109,7 @@ enum sun4i_usb_phy_type {
> sun8i_v3s_phy,
> sun50i_a64_phy,
> sun50i_h6_phy,
> + suniv_f1c100s_phy,
> };
>
> struct sun4i_usb_phy_cfg {
> @@ -859,6 +860,14 @@ static int sun4i_usb_phy_probe(struct platform_device
> *pdev) return 0;
> }
>
> +static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = {
> + .num_phys = 1,
> + .type = suniv_f1c100s_phy,
I think you should just use sun4i_a10_phy. It has no special handling. I don't
see a point adding new phy types if there is no special cases for it.
Best regards,
Jernej
> + .disc_thresh = 3,
> + .phyctl_offset = REG_PHYCTL_A10,
> + .dedicated_clocks = true,
> +};
> +
> static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
> .num_phys = 3,
> .type = sun4i_a10_phy,
> @@ -988,6 +997,8 @@ static const struct of_device_id
> sun4i_usb_phy_of_match[] = { { .compatible =
> "allwinner,sun50i-a64-usb-phy",
> .data = &sun50i_a64_cfg},
> { .compatible = "allwinner,sun50i-h6-usb-phy", .data =
&sun50i_h6_cfg },
> + { .compatible = "allwinner,suniv-f1c100s-usb-phy",
> + .data = &suniv_f1c100s_cfg },
> { },
> };
> MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
> --
> 2.37.1
