On Thu, Sep 22, 2022 at 09:57:08PM +0800, Yang Yingliang wrote: > In the probe path, dev_err() can be replaced with dev_err_probe() > which will check if error code is -EPROBE_DEFER and prints the > error name. It also sets the defer probe reason which can be > checked later through debugfs. It's more simple in error path. > > Signed-off-by: Yang Yingliang <yangyingliang@xxxxxxxxxx> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> > --- > drivers/usb/typec/qcom-pmic-typec.c | 5 ++--- > 1 file changed, 2 insertions(+), 3 deletions(-) > > diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c > index a0454a80c4a2..432ea62f1bab 100644 > --- a/drivers/usb/typec/qcom-pmic-typec.c > +++ b/drivers/usb/typec/qcom-pmic-typec.c > @@ -195,9 +195,8 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) > > qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev)); > if (IS_ERR(qcom_usb->role_sw)) { > - if (PTR_ERR(qcom_usb->role_sw) != -EPROBE_DEFER) > - dev_err(dev, "failed to get role switch\n"); > - ret = PTR_ERR(qcom_usb->role_sw); > + ret = dev_err_probe(dev, PTR_ERR(qcom_usb->role_sw), > + "failed to get role switch\n"); > goto err_typec_port; > } > > -- > 2.25.1 -- heikki