In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@xxxxxxxxxx>
---
drivers/usb/typec/tcpm/fusb302.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index db83b377b2f6..721b2a548084 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -1743,9 +1743,8 @@ static int fusb302_probe(struct i2c_client *client,
chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
if (IS_ERR(chip->tcpm_port)) {
fwnode_handle_put(chip->tcpc_dev.fwnode);
- ret = PTR_ERR(chip->tcpm_port);
- if (ret != -EPROBE_DEFER)
- dev_err(dev, "cannot register tcpm port, ret=%d", ret);
+ ret = dev_err_probe(dev, PTR_ERR(chip->tcpm_port),
+ "cannot register tcpm port\n");
goto destroy_workqueue;
}
--
2.25.1
