In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
Signed-off-by: Yang Yingliang <yangyingliang@xxxxxxxxxx>
---
drivers/usb/phy/phy-jz4770.c | 25 ++++++++-----------------
1 file changed, 8 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/usb/phy/phy-jz4770.c
index 4025da20b3fd..f16adcacdce3 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/usb/phy/phy-jz4770.c
@@ -321,27 +321,18 @@ static int jz4770_phy_probe(struct platform_device *pdev)
}
priv->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(priv->clk)) {
- err = PTR_ERR(priv->clk);
- if (err != -EPROBE_DEFER)
- dev_err(dev, "Failed to get clock\n");
- return err;
- }
+ if (IS_ERR(priv->clk))
+ return dev_err_probe(dev, PTR_ERR(priv->clk),
+ "Failed to get clock\n");
priv->vcc_supply = devm_regulator_get(dev, "vcc");
- if (IS_ERR(priv->vcc_supply)) {
- err = PTR_ERR(priv->vcc_supply);
- if (err != -EPROBE_DEFER)
- dev_err(dev, "Failed to get regulator\n");
- return err;
- }
+ if (IS_ERR(priv->vcc_supply))
+ return dev_err_probe(dev, PTR_ERR(priv->vcc_supply),
+ "Failed to get regulator\n");
err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
- if (err) {
- if (err != -EPROBE_DEFER)
- dev_err(dev, "Unable to register PHY\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(dev, err, "Unable to register PHY\n");
return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy);
}
--
2.25.1
