On Thu, Sep 08, 2022 at 06:40:19PM +0800, Ray Chi wrote:
> When a broken USB accessory connects to a USB host, usbcore might
> keep doing enumeration retries. If the host has a watchdog mechanism,
> the kernel panic will happen on the host.
>
> The patch provide a attribute to limit the numbers of retries and
> timeout lengths.
This is per-port, right? Please say that here.
> In addition, it also adds a function to stop the
> port initialization and ignore events on the port if the broken
> accessory is still connected.
So this should be 2 patches? Remember, only do one logical thing per
patch please.
>
> Signed-off-by: Ray Chi <raychi@xxxxxxxxxx>
> ---
> Changes since v2:
> - replace the quirk with the attribute
> - Document the attribute
> - modify hub_port_stop_enumerate() position in port_event()
> - modify the changelog
>
> Changes since v1:
> - remove usb_hub_set_port_power()
> - add a variable ignore_connect into struct port_dev
> - modify hub_port_stop_enumerate() and set ignore_connect in
> this function
> - avoid calling hub_port_connect_change() in port_event()
> ---
> Documentation/ABI/testing/sysfs-bus-usb | 9 ++++++
> drivers/usb/core/hub.c | 39 +++++++++++++++++++++++++
> drivers/usb/core/hub.h | 4 +++
> drivers/usb/core/port.c | 23 +++++++++++++++
> 4 files changed, 75 insertions(+)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
> index 568103d3376e..d44c8aaef929 100644
> --- a/Documentation/ABI/testing/sysfs-bus-usb
> +++ b/Documentation/ABI/testing/sysfs-bus-usb
> @@ -264,6 +264,15 @@ Description:
> attached to the port will not be detected, initialized,
> or enumerated.
>
> +What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/quick_init
> +Date: Sep 2022
> +Contact: Ray Chi <raychi@xxxxxxxxxx>
> +Description:
> + Some USB hosts have some watchdog mechanisms so that the device
> + may enter ramdump if it takes a long time during port initialization.
> + This attribute limits the numbers of retries and timeout lengths once
> + an initialization of the port meets failures.
The text here is very odd, maybe it's just a translation issue. A port
can not "meet" a failure. And this really has nothing to do with any
watchdog, it's just a "we want to fail broken devices quickly instead of
giving them lots of time to connect" type of issue, right?
And we already have different init schemes, "quick" is an odd way to
phrase this, but I can't think of anything else at the moment.
> +
> What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
> Date: May 2013
> Contact: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index d4b1e70d1498..f22caa133274 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -3081,6 +3081,29 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
> return status;
> }
>
> +/* Check whether a hub would stop enumeration or ignore events on the port. */
Based on what? Retries? Time of day? Phase of moon? :)
> +static bool hub_port_stop_enumerate(struct usb_hub *hub, int port1, int retries)
> +{
> + struct usb_port *port_dev = hub->ports[port1 - 1];
> +
> + if (port_dev->quick_init) {
> + if (port_dev->ignore_connect)
> + return true;
> +
> + /*
> + * Since some normal devices will be timeout in the first attempt,
> + * set the condition to half of the retries
> + */
> + if (retries < (PORT_INIT_TRIES - 1) / 2)
> + return false;
> +
> + port_dev->ignore_connect = true;
> + } else
> + port_dev->ignore_connect = false;
So this function modifies a port_dev value, AND returns it to the
caller? Why not document that somewhere? Why do both?
And if quick_init is false then it always set ignore_connect to false
and returns false always?
> +
> + return port_dev->ignore_connect;
> +}
> +
> /* Check if a port is power on */
> int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
> {
> @@ -4855,6 +4878,11 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
> buf->bMaxPacketSize0;
> kfree(buf);
>
> + if (r < 0 && port_dev->quick_init) {
> + retval = r;
> + goto fail;
> + }
> +
> retval = hub_port_reset(hub, port1, udev, delay, false);
> if (retval < 0) /* error or disconnect */
> goto fail;
> @@ -5387,6 +5415,9 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
> if ((status == -ENOTCONN) || (status == -ENOTSUPP))
> break;
>
> + if (hub_port_stop_enumerate(hub, port1, i))
> + break;
> +
> /* When halfway through our retry count, power-cycle the port */
> if (i == (PORT_INIT_TRIES - 1) / 2) {
> dev_info(&port_dev->dev, "attempt power cycle\n");
> @@ -5614,6 +5645,9 @@ static void port_event(struct usb_hub *hub, int port1)
> if (!pm_runtime_active(&port_dev->dev))
> return;
>
> + if (hub_port_stop_enumerate(hub, port1, 0))
> + return;
> +
> if (hub_handle_remote_wakeup(hub, port1, portstatus, portchange))
> connect_change = 1;
>
> @@ -5934,6 +5968,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
> ret = hub_port_init(parent_hub, udev, port1, i);
> if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
> break;
> +
> + if (hub_port_stop_enumerate(parent_hub, port1, i))
> + goto stop_enumerate;
> }
> mutex_unlock(hcd->address0_mutex);
>
> @@ -6022,6 +6059,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
> udev->bos = bos;
> return 0;
>
> +stop_enumerate:
> + mutex_unlock(hcd->address0_mutex);
> re_enumerate:
> usb_release_bos_descriptor(udev);
> udev->bos = bos;
> diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
> index b2925856b4cb..57995ec3af58 100644
> --- a/drivers/usb/core/hub.h
> +++ b/drivers/usb/core/hub.h
> @@ -90,6 +90,8 @@ struct usb_hub {
> * @is_superspeed cache super-speed status
> * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted.
> * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted.
> + * @ignore_connect: ignore the connection or not.
Which connection? Any future connection? Or the one that is currently
connected?
> + * @quick_init: limit the numbers of retries for port initialization
Limit it to what?
> */
> struct usb_port {
> struct usb_device *child;
> @@ -103,6 +105,8 @@ struct usb_port {
> u32 over_current_count;
> u8 portnum;
> u32 quirks;
> + bool ignore_connect;
> + bool quick_init;
Why are these bool, when:
> unsigned int is_superspeed:1;
> unsigned int usb3_lpm_u1_permit:1;
> unsigned int usb3_lpm_u2_permit:1;
Those are all bits?
Be consistent please.
thanks,
greg k-h
