Convert the loongson2 thermal binding to DT schema format using json-schema. Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx> --- Change in v2: 1. Add description and type about the "id". 2. Make the filename was based on compatible. .../bindings/thermal/loongson2-thermal.yaml | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/loongson2-thermal.yaml diff --git a/Documentation/devicetree/bindings/thermal/loongson2-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson2-thermal.yaml new file mode 100644 index 000000000000..2994ae3a56aa --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/loongson2-thermal.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/loongson2-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Thermal sensors on loongson2 SoCs + +maintainers: + - zhanghongchen <zhanghongchen@xxxxxxxxxxx> + - Yinbo Zhu <zhuyinbo@xxxxxxxxxxx> + +properties: + compatible: + const: loongson,loongson2-thermal + + reg: + maxItems: 1 + + id: + $ref: '//schemas/types.yaml#/definitions/uint32' + description: | + Specify the thermal sensor id. + minimum: 0 + maximum: 3 + + interrupts: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - id + - interrupt-parent + - interrupts + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + thermal: thermal@1fe01500 { + compatible = "loongson,loongson2-thermal"; + reg = <0 0x1fe01500 0 0x30>; + id = <0>; + interrupt-parent = <&icu>; + interrupts = <7>; + #thermal-sensor-cells = <1>; + }; -- 2.31.1
