NVIDIA Jetson devices in Force Recovery mode (RCM) do not support suspending, ie. flashing fails if the device has been suspended. The devices are still visible in lsusb and seem to work otherwise, making the issue hard to debug. This has been discovered in various forum posts, eg. [1]. The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding all the Jetson models listed in [2] on the assumption that they all behave similarly. [1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365 [2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html Signed-off-by: Hannu Hartikainen <hannu@xxxxxxx> --- drivers/usb/core/quirks.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f99a65a64588..11b27953ccd0 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -388,6 +388,15 @@ static const struct usb_device_id usb_quirk_list[] = { /* Kingston DataTraveler 3.0 */ { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, + /* NVIDIA Jetson devices in Force Recovery mode */ + { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, -- 2.37.3
