[PATCH] xhci: print warning when HCE was set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When HCE(Host Controller Error) is set, it means that the xhci hardware
controller has an error at this time, but the current xhci driver
software does not log this event.

By adding an HCE event detection in the xhci interrupt processing
interface, a warning log is output to the system, which is convenient
for system device status tracking.

Signed-off-by: Longfang Liu <liulongfang@xxxxxxxxxx>
---
 drivers/usb/host/xhci-ring.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index ad81e9a508b1..f6af479188e8 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3031,6 +3031,11 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 	if (!(status & STS_EINT))
 		goto out;
 
+	if (status & STS_HCE) {
+		xhci_warn(xhci, "WARNING: Host Controller Error\n");
+		goto out;
+	}
+
 	if (status & STS_FATAL) {
 		xhci_warn(xhci, "WARNING: Host System Error\n");
 		xhci_halt(xhci);
-- 
2.33.0




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux