Re: [PATCH v2 1/2] phy: tegra: xusb: add utmi pad power on/down ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06-09-22, 10:43, JC Kuo wrote:
> Hi Vinod,

Please _do_ _not_ _top_ _post_

> Before the device or host is being attached, we can keep most of the
> transceivers powered down (PD=1/PD_DR=1) to minimize power consumption. At this
> stage, in .phy_power_on(), we enable only the single-ended receiver (PD_ZI=0)
> for detecting connection. Upon detecting device's or host's connection, host or
> controller driver will invoke tegra_phy_xusb_utmi_pad_power_on() to power on all
> of the transceivers (PD=0/PD_DR=0) to equip full link functionality.

Thanks for this explanation... It helps!

Just a suggestion, can this be moved into phy_init() you have detected
connection in phy_power_on(), the transceiver can be enabled in
phy_int... Would that work?

-- 
~Vinod



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux