UAS:if ignore uas feature for these drivers can fix the not working and
output error message bug.
The UAS mode of Thinkplus and Hiksemi is reported to fail to work on
several platforms with the following error message,I tested these USB
disks on other architecture platforms as arm/loongson for different xHCI
controller,the same error occurred:
[ 39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled
endpoint or incorrect stream ring
[ 39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000
1b000000 05038000
[ 592.490369][ 1] xhci_hcd 0000:0c:00.3: Assuming host is dying, halting host.
[ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
inflight: CMD
[ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
04 00 00
[ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
inflight: CMD
[ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
00 08 00
And when running iozone will disconnect from the USB controller, then after
re-connecting the device will be offlined and not working at all.
We changed a lot of USB devices and contact relevant manufacturers to
confirm the USB disk is ok.
Signed-off-by: zenghongling <zenghongling@xxxxxxxxxx>
---
change for v4
- Change the send patch email address
change for v3
- Add the a description of why the patch is needed.
change for v2
-Change the ./script/checkpatch.pl warning.
--
---
drivers/usb/storage/unusual_uas.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index cdff7dc..ddcdf1a 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -62,6 +62,12 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_UAS),
+UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999,
+ "Hiksemi",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
/*
* Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
* commands in UAS mode. Observed with the 1.28 firmware; are there others?
@@ -142,6 +148,12 @@ UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+UNUSUAL_DEV(0x0bda, 0x9210, 0x0000, 0x9999,
+ "Hiksemi",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
/* Reported-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> */
UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
"Initio Corporation",
@@ -184,6 +196,12 @@ UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+UNUSUAL_DEV(0x17ef, 0x3899, 0x0000, 0x9999,
+ "Thinkplus",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
/* Reported-by: Hans de Goede <hdegoede@xxxxxxxxxx> */
UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
"VIA",
--
2.1.0
