The UAS mode of Thinkplus and Hiksemi is reported to fail to work on several platforms with the following error message: [ 39.702439] xhci_hcd 0000:0c:00.3: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 39.702442] xhci_hcd 0000:0c:00.3: @000000026c61f810 00000000 00000000 1b000000 05038000 And when running iozone will disconnect from the USB controller, then after re-connecting the device will be offlined and not working at all. Signed-off-by: zenghongling <zhongling0719@xxxxxxx> --- drivers/usb/storage/unusual_uas.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index cdff7dc..ddcdf1a 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -62,6 +62,12 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_UAS), +UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999, + "Hiksemi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI * commands in UAS mode. Observed with the 1.28 firmware; are there others? @@ -142,6 +148,12 @@ UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +UNUSUAL_DEV(0x0bda, 0x9210, 0x0000, 0x9999, + "Hiksemi", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> */ UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999, "Initio Corporation", @@ -184,6 +196,12 @@ UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +UNUSUAL_DEV(0x17ef, 0x3899, 0x0000, 0x9999, + "Thinkplus", + "External HDD", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_IGNORE_UAS), + /* Reported-by: Hans de Goede <hdegoede@xxxxxxxxxx> */ UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, "VIA", -- 2.1.0