This change adds callback to evaluate presence of contaminant in the TCPCI layer. Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx> --- drivers/usb/typec/tcpm/tcpci.c | 9 +++++++++ include/linux/usb/tcpci.h | 7 +++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 50674ecf430d..53f6fad61781 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -403,6 +403,14 @@ static void tcpci_frs_sourcing_vbus(struct tcpc_dev *dev) tcpci->data->frs_sourcing_vbus(tcpci, tcpci->data); } +static void tcpci_check_contaminant(struct tcpc_dev *dev, bool disconnect_while_debouncing) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + + if (tcpci->data->check_contaminant) + tcpci->data->check_contaminant(tcpci, tcpci->data, disconnect_while_debouncing); +} + static int tcpci_set_bist_data(struct tcpc_dev *tcpc, bool enable) { struct tcpci *tcpci = tcpc_to_tcpci(tcpc); @@ -777,6 +785,7 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) tcpci->tcpc.enable_frs = tcpci_enable_frs; tcpci->tcpc.frs_sourcing_vbus = tcpci_frs_sourcing_vbus; tcpci->tcpc.set_partner_usb_comm_capable = tcpci_set_partner_usb_comm_capable; + tcpci->tcpc.check_contaminant = tcpci_check_contaminant; if (tcpci->data->auto_discharge_disconnect) { tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge; diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h index 17657451c762..250b34ccbf9c 100644 --- a/include/linux/usb/tcpci.h +++ b/include/linux/usb/tcpci.h @@ -188,6 +188,11 @@ struct tcpci; * Optional; The USB Communications Capable bit indicates if port * partner is capable of communication over the USB data lines * (e.g. D+/- or SS Tx/Rx). Called to notify the status of the bit. + * @check_contaminant: + * Optional;The callback is called when CC pins report open status + * at the end of the deboumce period or when the port is still + * toggling. Chip level drivers are expected to check for contaminant + * and call tcpm_clean_port when the port is clean. */ struct tcpci_data { struct regmap *regmap; @@ -204,6 +209,8 @@ struct tcpci_data { void (*frs_sourcing_vbus)(struct tcpci *tcpci, struct tcpci_data *data); void (*set_partner_usb_comm_capable)(struct tcpci *tcpci, struct tcpci_data *data, bool capable); + void (*check_contaminant)(struct tcpci *tcpci, struct tcpci_data *data, + bool disconnect_while_debouncing); }; struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data); -- 2.37.2.672.g94769d06f0-goog