Hi, On 21/08/2022 16:34, Jilin Yuan wrote: > Delete the redundant word 'more'. > > Signed-off-by: Jilin Yuan <yuanjilin@xxxxxxxxxx> > --- > drivers/usb/serial/mct_u232.h | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h > index e3d09a83cab1..f79a1f1b6a98 100644 > --- a/drivers/usb/serial/mct_u232.h > +++ b/drivers/usb/serial/mct_u232.h > @@ -273,13 +273,13 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, > * Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART. > * Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART. > * Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has > - * changed state one more more times since the last time the MSR was > + * changed state one more times since the last time the MSR was This does not really make much sense before or after the patch. Should it read: "one or more times"? Thanks, Conor. > * read by the host. > * Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has > * had a low to high transition since the last time the MSR was read by > * the host. > * Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed > - * state one more more times since the last time the MSR was read by the > + * state one more times since the last time the MSR was read by the > * host. > * Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed > * state one more times since the last time the MSR was read by the
