On Mon, Aug 15, 2022 at 08:33:55PM -0700, Badhri Jagan Sridharan wrote:
> When the port does not support USB PD, prevent transition to PD
> only states when power supply property is written. In this case,
> TCPM transitions to SNK_NEGOTIATE_CAPABILITIES
> which should not be the case given that the port is not pd_capable.
>
> [ 84.308251] state change SNK_READY -> SNK_NEGOTIATE_CAPABILITIES [rev3 NONE_AMS]
> [ 84.308335] Setting usb_comm capable false
> [ 84.323367] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:5000 ret:0
> [ 84.323376] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]
>
> Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> drivers/usb/typec/tcpm/tcpm.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index ea5a917c51b1..904c7b4ce2f0 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -6320,6 +6320,13 @@ static int tcpm_psy_set_prop(struct power_supply *psy,
> struct tcpm_port *port = power_supply_get_drvdata(psy);
> int ret;
>
> + /*
> + * All the properties below are related to USB PD. The check needs to be
> + * property specific when a non-pd related property is added.
> + */
> + if (!port->pd_supported)
> + return -EOPNOTSUPP;
> +
> switch (psp) {
> case POWER_SUPPLY_PROP_ONLINE:
> ret = tcpm_psy_set_online(port, val);
> --
> 2.37.1.595.g718a3a8f04-goog
>
