Hi,
I repost again the original message I have posted to the kernel mailing
list as I think it wasn't forwarded entirely to you. If you still need
more information, feel free to tell me.
Thanks in advance
Bye,
David Arendt
Hi,
With kernel 2.6.31.2 I get the following error when I ending apcupsd:
Oct 6 21:00:46 server apcupsd[5238]: apcupsd exiting, signal 15
Oct 6 21:00:46 server BUG: unable to handle kernel paging request at
ffff880130a6d858
Oct 6 21:00:46 server IP: [<ffffffff8124ba55>]
tty_port_close_start+0xc5/0x1d0
Oct 6 21:00:46 server PGD 1002063 PUD 14067 PMD 0
Oct 6 21:00:46 server Oops: 0002 [#1] PREEMPT SMP
Oct 6 21:00:46 server last sysfs file:
/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sdb/size
Oct 6 21:00:46 server CPU 2
Oct 6 21:00:46 server Modules linked in: capifs nvidia(P) [last unloaded:
kernelcapi]
Oct 6 21:00:46 server Pid: 5238, comm: apcupsd Tainted: P
2.6.31.2server
#1 P5QL-E
Oct 6 21:00:46 server RIP: 0010:[<ffffffff8124ba55>] [<ffffffff8124ba55>]
tty_port_close_start+0xc5/0x1d0
Oct 6 21:00:46 server RSP: 0018:ffff88012e3abdb8 EFLAGS: 00010046
Oct 6 21:00:46 server RAX: ffff880130a6d858 RBX: ffff88012f90e900 RCX:
0000000000000000
Oct 6 21:00:46 server RDX: 0000000000001717 RSI: 0000000000000000 RDI:
ffff88012f90e900
Oct 6 21:00:46 server RBP: ffff88012fa6d808 R08: 0000000000000000 R09:
0000000000000000
Oct 6 21:00:46 server R10: 0000000000000000 R11: 0000000000000206 R12:
ffff88012e366000
Oct 6 21:00:46 server R13: ffff88012fa6d818 R14: 0000000000000296 R15:
0000000000000000
Oct 6 21:00:46 server FS: 00007ffecc5ec6f0(0000) GS:ffff880028054000(0000)
knlGS:0000000000000000
Oct 6 21:00:46 server CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Oct 6 21:00:46 server CR2: ffff880130a6d858 CR3: 000000012e397000 CR4:
00000000000006e0
Oct 6 21:00:46 server DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
Oct 6 21:00:46 server DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
Oct 6 21:00:46 server Process apcupsd (pid: 5238, threadinfo
ffff88012e3aa000, task
ffff88012fa0d910)
Oct 6 21:00:46 server Stack:
Oct 6 21:00:46 server ffff88012e366000 ffff88012f90e900 ffff88012fa6d808
ffff88012fa6d800
Oct 6 21:00:46 server <0> 0000000000000000 ffffffff81305932 0000000000000292
ffff88012e366000
Oct 6 21:00:46 server <0> ffff88012f90e900 0000000000000000 ffff88012f90e900
ffffffff81244d98
Oct 6 21:00:46 server Call Trace:
Oct 6 21:00:46 server [<ffffffff81305932>] ? serial_close+0x72/0xe0
Oct 6 21:00:46 server [<ffffffff81244d98>] ? tty_release_dev+0x198/0x590
Oct 6 21:00:46 server [<ffffffff810afc3f>] ? vfs_ioctl+0x2f/0xb0
Oct 6 21:00:46 server [<ffffffff812451a1>] ? tty_release+0x11/0x20
Oct 6 21:00:46 server [<ffffffff810a27ad>] ? __fput+0xcd/0x1e0
Oct 6 21:00:46 server [<ffffffff8109ef2b>] ? filp_close+0x5b/0x90
Oct 6 21:00:46 server [<ffffffff8109f011>] ? sys_close+0xb1/0x120
Oct 6 21:00:46 server [<ffffffff8100b3ab>] ? system_call_fastpath+0x16/0x1b
Oct 6 21:00:46 server Code: 18 4c 8b 74 24 20 48 83 c4 28 c3 0f 1f 00 8b
75 18 83
fe 01 0f 85 f3 00 00 00 ff 4d 18 8b 75 18 85 f6 75 a9 48 8d 85 50 00 00 01
<f0> 80
8d 50 00 00 01 01 41 80 8c 24 fc 01 00 00 20 4c 89 f6 4c
Oct 6 21:00:46 server RIP [<ffffffff8124ba55>]
tty_port_close_start+0xc5/0x1d0
Oct 6 21:00:46 server RSP <ffff88012e3abdb8>
Oct 6 21:00:46 server CR2: ffff880130a6d858
Oct 6 21:00:46 server ---[ end trace ed2ac2b5c302fe3c ]---
Oct 6 21:00:46 server note: apcupsd[5238] exited with preempt_count 2
With 2.6.31.1 everything worked flawlessly.
I use an usb to serial converter, here the output from lspci -v for the
converter:
Bus 006 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x067b Prolific Technology, Inc.
idProduct 0x2303 PL2303 Serial Port
bcdDevice 4.00
iManufacturer 1 Prolific Technology Inc.
iProduct 2 USB-Serial Controller D
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Thanks in advance
Bye,
David Arendt
Alan Stern wrote:
> On Wed, 7 Oct 2009, Oliver Neukum wrote:
>
>
>> Am Mittwoch, 7. Oktober 2009 12:37:45 schrieb admin@xxxxxxxxx:
>>
>>> Hi,
>>>
>>> With kernel 2.6.31.2 I get the following error when I ending apcupsd:
>>>
>>> Oct 6 21:00:46 server apcupsd[5238]: apcupsd exiting, signal 15
>>> Oct 6 21:00:46 server BUG: unable to handle kernel paging request at
>>> ffff880130a6d858
>>> Oct 6 21:00:46 server IP: [<ffffffff8124ba55>]
>>> tty_port_close_start+0xc5/0x1d0
>>>
>> This looks like tty_port_close_start() is called with port == NULL
>> And the new tty code went in with .2. I have to defer this to the Alans.
>>
>
> More context from the log, please.
>
> Alan Stern
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
